AutoCodes – Dodge – P2728 Dodge

P2728 Dodge Code - Pressure Control Solenoid 'E' Control Circuit Range/Performance

Quick Answer

The Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve 'E'. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2728 Dodge indicates Pressure Control Solenoid 'E' Control Circuit Range/Performance.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty line pressure solenoid valve 'E'.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,712

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 30, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2728 Dodge Description

The Pressure Control (PC) Solenoid Valve an electronic pressure regulator that controls transmission line pressure based on current flow through its coil windings. As current flow is increased, the magnetic field produced by the coil moves the solenoid’s plunger further away from the exhaust port. Opening the exhaust port decreases the output fluid pressure regulated by the PC solenoid valve, which ultimately decreases line pressure. The line pressure solenoid valve regulates the oil pump discharge pressure to suit the driving condition in response to a signal sent from the Transmission Control Module (TCM).

OBDII Code P2728 Dodge - Pressure Control Solenoid 'E' Control Circuit Range/Performance - AutoCodes.com — P2728 Dodge Code - Pressure Control Solenoid 'E' Control Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P2728 Dodge?

Low transmission fluid level
Dirty transmission fluid
Faulty line pressure solenoid valve 'E'
Line pressure solenoid valve 'E' harness is open or shorted
Line pressure solenoid valve 'E' circuit poor electrical connection

How to Fix the DTC P2728 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2728 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2728 Dodge code?

Need more information on how to fix the P2728 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2728 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2728 Dodge Code

What does the OBDII code P2728 mean for a Dodge vehicle?

P2728 indicates an issue with the Pressure Control Solenoid 'E' in the transmission. It means the solenoid's control circuit is operating outside the expected range or performance parameters.

What are the common symptoms of code P2728 in a Dodge?

Symptoms may include harsh or erratic shifting, transmission slipping, poor fuel economy, the transmission stuck in a single gear (limp mode), and the Check Engine Light illuminating.

What causes the P2728 code to appear in a Dodge?

Possible causes include a faulty pressure control solenoid, transmission fluid that is low, dirty, or contaminated, damaged wiring or connectors in the solenoid circuit, or internal transmission issues.

Can I drive my Dodge with the P2728 code?

Driving with this code is not recommended. Transmission performance may be impaired, potentially causing further damage or unsafe driving conditions.

How is the P2728 code diagnosed?

A mechanic will use an OBDII scanner to confirm the code, inspect the transmission fluid condition and level, visually check the wiring and connectors, and test the pressure control solenoid for proper operation.

How do I fix the P2728 code in a Dodge?

Repairs may include replacing the faulty pressure control solenoid, repairing or replacing damaged wiring or connectors, flushing and refilling the transmission fluid, or addressing internal transmission problems.

How much does it cost to repair the P2728 code on a Dodge vehicle?

Repair costs can vary but typically range from $200 to $500 for solenoid replacement or transmission service. More extensive internal transmission repairs can cost significantly more.

What type of transmission fluid should I use to prevent code P2728?

Always use the transmission fluid specified in your Dodge ownerâ€™s manual. Using the wrong type can lead to solenoid and transmission issues.

Can a P2728 code be caused by a software issue?

Yes, in some cases, outdated transmission control module (TCM) software can cause communication errors leading to this code. A software update might resolve the issue.

Is it necessary to reset the Check Engine Light after fixing the P2728 code?

Yes, after repairs are completed, the code should be cleared using an OBDII scanner to reset the Check Engine Light and verify that the issue is resolved.