P2728 Buick Code - Pressure Control Solenoid Valve 5 Performance
Quick Answer
The pressure control solenoid 5 is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2728 Buick indicates Pressure Control Solenoid Valve 5 Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2728 Buick Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects an internal electrical performance malfunction of the clutch pressure control solenoid valve 5 control circuit where the measured clutch pressure control solenoid valve 5 current does not equal the commanded clutch pressure control solenoid valve 5 current for 5 s.
What are the Possible Causes of the DTC P2728 Buick?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2728 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2728 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2728 Buick code?
Need more information on how to fix the P2728 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2728 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2728 Buick Code
1. What does the OBDII code P2728 mean on a Buick?
P2728 indicates a performance issue with Pressure Control Solenoid Valve 5 in the transmission, which regulates hydraulic pressure for proper gear shifting.
2. What are common symptoms of a P2728 code on a Buick?
Symptoms may include harsh or erratic shifting, transmission slipping, decreased fuel efficiency, or the vehicle going into limp mode.
3. What causes the P2728 code on a Buick?
Common causes include a faulty pressure control solenoid, dirty or low transmission fluid, wiring issues, or internal transmission damage.
4. Can I drive my Buick with a P2728 code?
While the car may still be drivable, continuing to drive with this code can cause further transmission damage. It's best to address the issue promptly.
5. How do I diagnose a P2728 code on my Buick?
Diagnosing involves checking transmission fluid levels and condition, inspecting wiring and connectors, and testing the pressure control solenoid for proper functionality.
6. How much does it cost to fix a P2728 code on a Buick?
Repair costs vary but may range from $200 to $500 for solenoid replacement, with higher costs if additional transmission repairs are needed.
7. Can low transmission fluid cause a P2728 code on a Buick?
Yes, low or dirty transmission fluid can cause improper solenoid performance, leading to the P2728 code.
8. How do I fix a P2728 code on my Buick?
Repairs may involve replacing the pressure control solenoid, cleaning or replacing transmission fluid, and repairing any damaged wiring or connectors.
9. Will resetting the code fix a P2728 issue on a Buick?
Clearing the code without addressing the underlying problem will not fix the issue and the code will likely return.
10. What tools are needed to diagnose the P2728 code on a Buick?
You'll need an OBDII scanner, a multimeter to check wiring, and possibly a transmission pressure gauge for further diagnostic tests.
Discuss the causes and fixes for P2728 Buick OBDII Code
Code P2728 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
