AutoCodes – GMC – P2725 GMC

P2725 GMC Code - Pressure Control Solenoid Valve 5 Electrical

Quick Answer

The pressure control solenoid 5 is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2725 GMC indicates Pressure Control Solenoid Valve 5 Electrical.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 344

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2725 GMC Description

The pressure control solenoid 5 is part of the control solenoid valve assembly which has no serviceable parts. The normally low-pressure control solenoid 5 regulates and directs oil pressure to the 1-2-3-4 clutch regulator valve and 1-2-3-4 clutch boost valve. Increasing pressure control solenoid 5 pressure increases pressure to the 1-2-3-4 clutch. The Transmission Control Module varies the current to the pressure control solenoid 5 through a low-side driver. Increasing the current to pressure control solenoid 5 increases oil pressure by closing OFF the solenoid exhaust port. Decreasing the current to pressure control solenoid 5 decreases oil pressure by opening the exhaust port. Pressure control solenoid 5 power is supplied by the Transmission Control Module through a high side driver. The high-side driver protects the circuit and components from excessive current flow. If excessive current flow is detected, the high side driver will turn OFF. When the fault is corrected, the high-side driver will reset.

OBDII Code P2725 GMC - Pressure Control Solenoid Valve 5 Electrical - AutoCodes.com — P2725 GMC Code - Pressure Control Solenoid Valve 5 Electrical

What does this mean?

What are the Possible Causes of the DTC P2725 GMC?

Low transmission fluid level
Dirty transmission fluid
Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness or connectors
Control Solenoid Valve Assembly circuit is open or shorted

How to Fix the DTC P2725 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2725 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2725 GMC code?

Need more information on how to fix the P2725 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2725 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2725 GMC Code

1. What does the OBD-II code P2725 mean for a GMC vehicle?

The P2725 code indicates an electrical fault in Pressure Control Solenoid Valve 5, which is responsible for regulating hydraulic pressure in the transmission.

2. What are the common symptoms of the P2725 code on a GMC?

Symptoms may include harsh or delayed shifting, transmission slipping, decreased fuel efficiency, or the vehicle entering limp mode.

3. What causes the P2725 code to appear on a GMC?

Common causes include a faulty pressure control solenoid, damaged wiring or connectors, low transmission fluid levels, or a malfunctioning transmission control module (TCM).

4. Can I drive my GMC with a P2725 code?

Itâ€™s not recommended to drive with this code active, as it can lead to transmission damage or unsafe driving conditions due to erratic shifting.

5. How is the P2725 code diagnosed on a GMC?

A mechanic will typically use a scan tool to confirm the code, inspect the wiring and connectors, test the solenoidâ€™s resistance, and check the transmission fluid condition.

6. How do I fix the P2725 code on my GMC?

Repairs may include replacing the faulty solenoid, repairing damaged wiring, cleaning connectors, topping off or replacing the transmission fluid, or reprogramming the TCM.

7. How much does it cost to fix a P2725 code on a GMC?

Repair costs vary but typically range between $150 and $400, depending on whether the solenoid, wiring, or other components need replacement.

8. Can low transmission fluid cause the P2725 code on a GMC?

Yes, low or contaminated transmission fluid can disrupt solenoid operation and trigger the P2725 code.

9. Does a P2725 code require a full transmission replacement on a GMC?

Not necessarily. Most cases are resolved by addressing the solenoid, wiring, or fluid issues rather than replacing the entire transmission.

10. How can I prevent the P2725 code from occurring on my GMC?

Regularly check and maintain transmission fluid levels, inspect wiring and connectors for damage, and follow the manufacturerâ€™s recommended maintenance schedule.