P2723 2017 GMC Sierra Code - Pressure Control Solenoid Valve 5 Stuck Off
Quick Answer
The clutch pressure control solenoid 5 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2723 2017 GMC Sierra indicates Pressure Control Solenoid Valve 5 Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2723 2017 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio or neutral condition when the 1-2-3-4 clutch is commanded ON. This condition must occur 3 times.
What are the Possible Causes of the DTC P2723 2017 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2723 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2723 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2723 2017 GMC Sierra code?
Need more information on how to fix the P2723 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2723 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2723 2017 GMC Sierra Code
1. What are the common symptoms of OBDII code P2723 in a 2017 GMC Sierra?
- Common symptoms include harsh shifting, delayed shifting, loss of transmission power, and illuminated Check Engine light.
2. What does the OBDII code P2723 "Pressure Control Solenoid Valve 5 Stuck Off" mean for a 2017 GMC Sierra?
- This code indicates that the pressure control solenoid valve 5 in the transmission is not functioning properly, causing issues with hydraulic pressure regulation.
3. What are the possible causes of the Pressure Control Solenoid Valve 5 Stuck Off code in a 2017 GMC Sierra?
- Possible causes include a faulty solenoid valve, wiring or connector issues, low transmission fluid levels, or internal transmission problems.
4. How can I diagnose the cause of OBDII code P2723 in my 2017 GMC Sierra?
- Diagnosing this code may involve checking the transmission fluid level and condition, inspecting the wiring and connectors related to the solenoid valve, and performing a transmission pressure test.
5. Can I continue driving my 2017 GMC Sierra with OBDII code P2723 present?
- It is not recommended to drive the vehicle with this code present, as it can lead to further transmission damage and potentially unsafe driving conditions.
6. How can I repair OBDII code P2723 in my 2017 GMC Sierra?
- Repair options may include replacing the pressure control solenoid valve 5, repairing any damaged wiring or connectors, ensuring proper transmission fluid levels, and addressing any internal transmission issues.
7. Is it possible to reset OBDII code P2723 in a 2017 GMC Sierra without fixing the underlying issue?
- While you can clear the code using an OBDII scanner, it is crucial to address the root cause to prevent the problem from reoccurring and causing potential transmission damage.
8. Can a DIY enthusiast fix OBDII code P2723 in a 2017 GMC Sierra?
- Depending on the level of expertise, some DIY enthusiasts may be able to address this code by replacing the pressure control solenoid valve and performing basic diagnostic procedures.
9. How much does it typically cost to repair OBDII code P2723 in a 2017 GMC Sierra at a mechanic or dealership?
- The cost of repairing this code can vary depending on the exact cause and the labor rates of the service provider, but it may range from a few hundred to over a thousand dollars.
10. Are there any preventive maintenance steps to avoid OBDII code P2723 in a 2017 GMC Sierra?
- Regularly checking and maintaining proper transmission fluid levels, addressing any transmission leaks promptly, and following the manufacturer's recommended service intervals can help prevent issues leading to this code.
Discuss the causes and fixes for P2723 2017 GMC Sierra OBDII Code
Code P2723 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
