P2723 2014 GMC Sierra Code - Pressure Control Solenoid Valve 5 Stuck Off
Quick Answer
The clutch pressure control solenoid 5 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2723 2014 GMC Sierra indicates Pressure Control Solenoid Valve 5 Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2723 2014 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio or neutral condition when the 1-2-3-4 clutch is commanded ON. This condition must occur 3 times.
What are the Possible Causes of the DTC P2723 2014 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2723 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2723 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2723 2014 GMC Sierra code?
Need more information on how to fix the P2723 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2723 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2723 2014 GMC Sierra Code
1. What does the OBDII code P2723 mean on a 2014 GMC Sierra?
P2723 indicates that the Pressure Control Solenoid Valve 5 in the transmission is stuck off, which affects gear shifting and transmission performance.
2. What are the symptoms of a P2723 code on a 2014 GMC Sierra?
Common symptoms include harsh or delayed shifting, slipping gears, transmission overheating, poor fuel economy, and the check engine light being illuminated.
3. What causes the P2723 code in a 2014 GMC Sierra?
Possible causes include a faulty pressure control solenoid valve, dirty or low transmission fluid, wiring issues, or internal transmission problems.
4. How can I diagnose the P2723 code on my 2014 GMC Sierra?
Diagnosis involves checking the transmission fluid level and condition, inspecting wiring and connectors for damage, and using a scan tool to monitor solenoid operation and transmission performance.
5. Can I drive my 2014 GMC Sierra with a P2723 code?
Driving with code P2723 is not recommended, as it can cause further damage to the transmission and lead to unsafe driving conditions.
6. How do I fix the P2723 code on my 2014 GMC Sierra?
Common fixes include replacing the faulty solenoid, cleaning or replacing the transmission fluid, repairing damaged wiring, or rebuilding the transmission if internal issues are found.
7. How much does it cost to repair a P2723 code on a 2014 GMC Sierra?
Repair costs vary but typically range from $200 to $500 for solenoid replacement. Transmission rebuilds or major repairs can cost significantly more.
8. Can low transmission fluid cause a P2723 code?
Yes, low or contaminated transmission fluid can cause solenoids to malfunction and trigger the P2723 code.
9. What tools are needed to fix the P2723 code on a 2014 GMC Sierra?
Tools may include a scan tool for diagnostics, a transmission fluid dipstick, basic hand tools, and potentially a transmission jack for solenoid access.
10. Is the P2723 code covered under warranty for my 2014 GMC Sierra?
It depends on the vehicle’s age, mileage, and warranty terms. Check with your GMC dealership for coverage information.
Discuss the causes and fixes for P2723 2014 GMC Sierra OBDII Code
Code P2723 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
