AutoCodes – Chevrolet – P2720 2014 Chevrolet Silverado

P2720 2014 Chevrolet Silverado Code - Pressure Control Solenoid 4 Control Circuit Low Voltage

Quick Answer

The pressure control solenoid 4 is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2720 2014 Chevrolet Silverado indicates Pressure Control Solenoid 4 Control Circuit Low Voltage.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 231

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2720 2014 Chevrolet Silverado Description

The pressure control solenoid 4 is part of the control solenoid valve assembly which has no serviceable parts. The normally low-pressure control solenoid 4 regulates and directs oil pressure to the 2-6 clutch regulator valve. Increasing pressure control solenoid 4 pressure increases pressure to the 2-6 clutch regulator valve. The Transmission Control Module (TCM) varies the current to the pressure control solenoid 4 through a low-side driver. Increasing the current to pressure control solenoid 4 increases oil pressure by closing OFF the solenoid exhaust port. Decreasing the current to pressure control solenoid 4 decreases oil pressure by opening the exhaust port. Pressure control solenoid 4 power is supplied by the Transmission Control Module through a high side driver. The high-side driver protects the circuit and components from excessive current flow. If excessive current flow is detected, the high side driver will turn OFF. When the fault is corrected the high-side driver will reset.
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects a short to ground on the pressure control solenoid 4 control circuit for 1 s.

OBDII Code P2720 2014 Chevrolet Silverado - Pressure Control Solenoid 4 Control Circuit Low Voltage - AutoCodes.com — P2720 2014 Chevrolet Silverado Code - Pressure Control Solenoid 4 Control Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P2720 2014 Chevrolet Silverado?

Low transmission fluid level
Dirty transmission fluid
Faulty Control Solenoid Valve Assembly
Control Solenoid Valve Assembly harness or connectors
Control Solenoid Valve Assembly circuit is open or shorted

How to Fix the DTC P2720 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2720 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2720 2014 Chevrolet Silverado code?

Need more information on how to fix the P2720 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2720 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2720 2014 Chevrolet Silverado Code

1. What does the OBDII code P2720 mean on a 2014 Chevrolet Silverado?

P2720 indicates a problem with the Pressure Control Solenoid 4 Control Circuit, specifically a low voltage issue detected by the transmission control module (TCM).

2. What are the common symptoms of code P2720 on a 2014 Chevrolet Silverado?

Symptoms may include harsh or delayed shifting, slipping transmission, decreased fuel efficiency, and the illumination of the check engine light.

3. What causes the P2720 code in a 2014 Chevrolet Silverado?

Common causes include a faulty pressure control solenoid, damaged or corroded wiring, a failing TCM, or low transmission fluid levels.

4. Can I continue to drive my 2014 Chevrolet Silverado with a P2720 code?

While the vehicle may still be drivable, ignoring the issue can lead to further transmission damage or unsafe driving conditions.

5. How do I diagnose the P2720 code on a 2014 Chevrolet Silverado?

Diagnosis involves scanning for codes, inspecting the wiring and connectors for damage, testing the pressure control solenoid, and checking transmission fluid levels.

6. How do I fix the P2720 code on my 2014 Chevrolet Silverado?

Repairs may include replacing the pressure control solenoid, repairing or replacing damaged wiring, updating or reprogramming the TCM, or addressing low transmission fluid.

7. Can low transmission fluid cause the P2720 code on a 2014 Chevrolet Silverado?

Yes, low or dirty transmission fluid can affect solenoid performance and trigger the P2720 code.

8. How much does it cost to repair a P2720 code on a 2014 Chevrolet Silverado?

Costs vary depending on the specific issue, but replacing a pressure control solenoid typically costs $200â€“$400, including parts and labor.

9. What tools are needed to diagnose the P2720 code in a 2014 Chevrolet Silverado?

Youâ€™ll need an OBDII scanner, a multimeter to test voltage, and basic tools for inspecting and repairing wiring or solenoids.

10. Is the P2720 code specific to the 2014 Chevrolet Silverado?

No, the P2720 code can appear on other vehicles with similar transmission systems, but the troubleshooting process may differ depending on the make and model.