AutoCodes – Chevrolet – P2719 2015 Chevrolet Silverado

P2719 2015 Chevrolet Silverado Code - Pressure Control Solenoid 4 System Performance

Quick Answer

The pressure control solenoid 4 is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2719 2015 Chevrolet Silverado indicates Pressure Control Solenoid 4 System Performance.
Common causes
Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 321
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 25, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2719 2015 Chevrolet Silverado Description

The pressure control solenoid 4 is part of the control solenoid valve assembly which has no serviceable parts. The normally low-pressure control solenoid 4 regulates and directs oil pressure to the 2-6 clutch regulator valve. Increasing pressure control solenoid 4 pressure increases pressure to the 2-6 clutch regulator valve. The Transmission Control Module (TCM) varies the current to the pressure control solenoid 4 through a low-side driver. Increasing the current to pressure control solenoid 4 increases oil pressure by closing OFF the solenoid exhaust port. Decreasing the current to pressure control solenoid 4 decreases oil pressure by opening the exhaust port. Pressure control solenoid 4 power is supplied by the Transmission Control Module through a high side driver. The high-side driver protects the circuit and components from excessive current flow. If excessive current flow is detected, the high side driver will turn OFF. When the fault is corrected the high-side driver will reset.
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects an internal electrical malfunction on the pressure control solenoid 4 control circuit where the measured pressure control solenoid 4 current does not equal the commanded pressure control solenoid 4 current for 5 s.
OBDII Code P2719 2015 Chevrolet Silverado - Pressure Control Solenoid 4 System Performance - AutoCodes.com
P2719 2015 Chevrolet Silverado Code - Pressure Control Solenoid 4 System Performance

What are the Possible Causes of the DTC P2719 2015 Chevrolet Silverado?

  • Low transmission fluid level
  • Dirty transmission fluid
  • Faulty Control Solenoid Valve Assembly
  • Control Solenoid Valve Assembly harness or connectors
  • Control Solenoid Valve Assembly circuit is open or shorted

How to Fix the DTC P2719 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2719 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2719 2015 Chevrolet Silverado code?

Need more information on how to fix the P2719 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2719 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2719 2015 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P2719 in a 2015 Chevrolet Silverado?

- Common symptoms include rough shifting, transmission slipping, decreased fuel efficiency, and the illumination of the Check Engine Light.

2. What does OBDII code P2719 in a 2015 Chevrolet Silverado indicate?

- This code specifically points to an issue with the Pressure Control Solenoid 4 System Performance in the transmission.

3. What are the possible causes of OBDII code P2719 in a 2015 Chevrolet Silverado?

- Potential causes include a faulty pressure control solenoid, low transmission fluid levels, fluid contamination, electrical issues, or a malfunctioning transmission control module.

4. How can I diagnose the OBDII code P2719 in my 2015 Chevrolet Silverado?

- Diagnosis typically involves using a scan tool to check for the code, inspecting the transmission fluid level and condition, and testing the pressure control solenoid for proper function.

5. What are some tips for repairing OBDII code P2719 in a 2015 Chevrolet Silverado?

- Repair options may include replacing the pressure control solenoid, performing a transmission fluid flush and filter change, checking and repairing any damaged wiring, or reprogramming the transmission control module.

6. Can I continue driving my 2015 Chevrolet Silverado with OBDII code P2719?

- It is not recommended to continue driving with this code present, as it can lead to further transmission damage and potentially unsafe driving conditions.

7. How much does it typically cost to repair OBDII code P2719 in a 2015 Chevrolet Silverado?

- Repair costs can vary depending on the exact cause of the issue, but expect to pay anywhere from $200 to $800 for parts and labor.

8. Is OBDII code P2719 a common problem in 2015 Chevrolet Silverado vehicles?

- While not extremely common, issues with the Pressure Control Solenoid 4 System Performance can occur in 2015 Chevrolet Silverado models, especially as the vehicle ages.

9. Can I reset the Check Engine Light after repairing OBDII code P2719 in my 2015 Chevrolet Silverado?

- Yes, once the issue has been repaired, the Check Engine Light can be reset using a scan tool to clear the trouble code from the vehicle's memory.

10. Are there any preventative measures I can take to avoid OBDII code P2719 in my 2015 Chevrolet Silverado?

- Regularly servicing the transmission, maintaining proper fluid levels, and addressing any transmission issues promptly can help prevent the occurrence of this code.

Discuss the causes and fixes for P2719 2015 Chevrolet Silverado OBDII Code

Code P2719 2015 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play