P2715 2017 GMC Sierra Code - Pressure Control Solenoid Valve 4 Stuck On
Quick Answer
The clutch pressure control solenoid 4 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2715 2017 GMC Sierra indicates Pressure Control Solenoid Valve 4 Stuck On.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2715 2017 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio change when the 2-6 clutch is commanded OFF during a shift or when 2nd gear ratio is detected in 1st gear. This condition must occur 3 times.
What are the Possible Causes of the DTC P2715 2017 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2715 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2715 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2715 2017 GMC Sierra code?
Need more information on how to fix the P2715 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2715 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2715 2017 GMC Sierra Code
1. What does the OBDII code P2715 mean on a 2017 GMC Sierra?
P2715 indicates that the Powertrain Control Module (PCM) has detected that Pressure Control Solenoid Valve 4 is stuck in the "on" position, affecting the transmission's hydraulic pressure.
2. What are the common symptoms of P2715 on a 2017 GMC Sierra?
Common symptoms include harsh or delayed shifting, transmission slipping, poor acceleration, or the transmission being stuck in a single gear. The Check Engine Light will also illuminate.
3. What causes the P2715 code to appear on my 2017 GMC Sierra?
Possible causes include a faulty pressure control solenoid, a clogged or dirty transmission valve body, low or contaminated transmission fluid, damaged wiring or connectors, or a malfunctioning PCM.
4. Can driving with the P2715 code damage my 2017 GMC Sierra?
Yes, driving with this code for an extended period can cause further damage to the transmission, leading to costly repairs. It’s best to address the issue promptly.
5. How do I diagnose the P2715 code on my 2017 GMC Sierra?
Diagnosis involves checking the transmission fluid level and condition, inspecting wiring and connectors for damage, testing the pressure control solenoid, and running a scan tool to monitor transmission pressure.
6. How can I fix the P2715 code on a 2017 GMC Sierra?
Repairs may include replacing the faulty pressure control solenoid, cleaning or repairing the valve body, flushing and replacing transmission fluid, fixing damaged wiring, or reprogramming or replacing the PCM if necessary.
7. How much does it cost to repair the P2715 code on a 2017 GMC Sierra?
Repair costs can vary, but replacing a pressure control solenoid typically costs $200–$500, including parts and labor. Additional costs may arise if the issue involves the valve body, wiring, or PCM.
8. Can low transmission fluid cause the P2715 code on a 2017 GMC Sierra?
Yes, low or contaminated transmission fluid can lead to insufficient hydraulic pressure, which may cause the solenoid to stick and trigger the P2715 code.
9. Is the P2715 code specific to the 2017 GMC Sierra?
No, the P2715 code is a generic OBDII code that can appear on other vehicles with similar transmission systems, but the exact symptoms and repair steps may vary by make and model.
10. Do I need to reprogram the PCM after fixing the P2715 code on my 2017 GMC Sierra?
In some cases, reprogramming or resetting the PCM may be required after repairs to clear the code and ensure proper transmission operation.
Discuss the causes and fixes for P2715 2017 GMC Sierra OBDII Code
Code P2715 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
