P2714 2017 Toyota RAV4 Code - Pressure Control Solenoid 'D' Performance
Quick Answer
Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2714 2017 Toyota RAV4 indicates Pressure Control Solenoid 'D' Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2714 2017 Toyota RAV4 Description
The ECM calculates the amount of heat absorbed by the friction material based on the difference in speed (clutch slippage) between the turbine and output shaft. The ECM turns on the MIL and stores this Diagnostic Trouble Code (DTC) when the amount of heat absorption exceeds the specified value.
When the shift solenoid valve SLT remains on, the line pressure goes down, and the clutch engagement force decreases.
What are the Possible Causes of the DTC P2714 2017 Toyota RAV4?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT)
- Pressure Control Solenoid 'D' valve harness is open or shorted
- Pressure Control Solenoid 'D' valve circuit poor electrical connection
- Transmission valve body assembly is blocked
- Faulty Automatic transaxle assembly
How to Fix the DTC P2714 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2714 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2714 2017 Toyota RAV4 code?
Need more information on how to fix the P2714 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2714 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2714 2017 Toyota RAV4 Code
1. What does the OBDII code P2714 mean for a 2017 Toyota RAV4?
It indicates a performance issue with Pressure Control Solenoid 'D', which helps regulate hydraulic pressure in the transmission.
2. What are the common symptoms of a P2714 code?
Symptoms may include harsh or delayed shifting, transmission slippage, poor fuel economy, or the vehicle entering limp mode.
3. What causes the P2714 code to appear?
Common causes include a faulty pressure control solenoid, dirty or low transmission fluid, a clogged transmission filter, or wiring issues in the solenoid circuit.
4. Can I drive my 2017 Toyota RAV4 with a P2714 code?
It’s not recommended to drive for long with this code, as it may lead to further transmission damage or unsafe driving conditions.
5. How do I fix a P2714 code on a 2017 Toyota RAV4?
Repairs may include replacing the faulty solenoid, flushing and refilling the transmission fluid, cleaning or replacing the transmission filter, or repairing damaged wiring.
6. How much does it cost to fix a P2714 code?
Costs vary, but replacing a solenoid typically ranges from $200 to $500, while a fluid flush and filter replacement can cost $150 to $300.
7. How is the P2714 code diagnosed?
A mechanic will use an OBDII scanner, inspect the transmission fluid, check solenoid resistance, and test the wiring and connectors for faults.
8. Can low transmission fluid cause a P2714 code?
Yes, low or dirty transmission fluid can result in insufficient hydraulic pressure, triggering the code.
9. Does the P2714 code always mean the solenoid is bad?
No, the issue could also stem from wiring problems, a clogged filter, or contaminated fluid, so proper diagnosis is essential.
10. How can I prevent a P2714 code from occurring?
Regular transmission maintenance, including fluid changes and inspections, can help prevent solenoid performance issues.
Discuss the causes and fixes for P2714 2017 Toyota RAV4 OBDII Code
Code P2714 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
