P2714 2016 GMC Sierra Code - Pressure Control Solenoid Valve 4 Stuck Off
Quick Answer
The clutch pressure control solenoid 4 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2714 2016 GMC Sierra indicates Pressure Control Solenoid Valve 4 Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2714 2016 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio or neutral condition when the 2-6 clutch is commanded ON. This condition must occur 3 times.
What are the Possible Causes of the DTC P2714 2016 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2714 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2714 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2714 2016 GMC Sierra code?
Need more information on how to fix the P2714 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2714 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2714 2016 GMC Sierra Code
1. What does OBDII code P2714 on a 2016 GMC Sierra mean?
The code P2714 indicates a problem with Pressure Control Solenoid Valve 4 being stuck in the off position.
2. What are the common symptoms of a Pressure Control Solenoid Valve 4 Stuck Off issue?
Common symptoms include harsh shifting, delayed shifting, transmission slipping, and a decrease in fuel efficiency.
3. What are the possible causes of the Pressure Control Solenoid Valve 4 Stuck Off code?
Potential causes can include a faulty pressure control solenoid valve, low transmission fluid level, dirty or contaminated transmission fluid, electrical issues, or a malfunctioning transmission control module.
4. How serious is the P2714 code in a 2016 GMC Sierra?
Ignoring the P2714 code can lead to further damage to the transmission system, potentially resulting in costly repairs if not addressed promptly.
5. Can I continue driving my 2016 GMC Sierra with the P2714 code?
It is not recommended to continue driving the vehicle with the P2714 code present, as it can cause further damage to the transmission and potentially leave you stranded.
6. How can I diagnose and repair a Pressure Control Solenoid Valve 4 Stuck Off issue?
Diagnosis typically involves checking the transmission fluid level and condition, inspecting the pressure control solenoid valve, and performing a thorough transmission system scan with a diagnostic tool. Repairs may involve replacing the faulty solenoid valve, performing a transmission fluid flush, or addressing any wiring or module issues.
7. Can I reset the OBDII code P2714 on my 2016 GMC Sierra myself?
While you can clear the code with an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring.
8. How much does it cost to repair a Pressure Control Solenoid Valve 4 Stuck Off problem on a 2016 GMC Sierra?
The cost of repairs can vary depending on the exact cause of the issue, but it is advisable to consult a professional mechanic for an accurate diagnosis and cost estimate.
9. How can I prevent the P2714 code from appearing on my 2016 GMC Sierra in the future?
Regular maintenance, including checking and changing the transmission fluid as recommended by the manufacturer, can help prevent issues such as Pressure Control Solenoid Valve 4 Stuck Off from occurring.
10. Is the P2714 code a common issue in 2016 GMC Sierra vehicles?
While it may not be one of the most common OBDII codes, issues related to pressure control solenoids can occur in automatic transmissions and should be addressed promptly to avoid further damage.
Discuss the causes and fixes for P2714 2016 GMC Sierra OBDII Code
Code P2714 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
