P2714 2016 Chevrolet Silverado Code - Pressure Control Solenoid Valve 4 Stuck Off
Quick Answer
The clutch pressure control solenoid 4 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2714 2016 Chevrolet Silverado indicates Pressure Control Solenoid Valve 4 Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2714 2016 Chevrolet Silverado Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio or neutral condition when the 2-6 clutch is commanded ON. This condition must occur 3 times.
What are the Possible Causes of the DTC P2714 2016 Chevrolet Silverado?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2714 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2714 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2714 2016 Chevrolet Silverado code?
Need more information on how to fix the P2714 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2714 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2714 2016 Chevrolet Silverado Code
1. What does the OBDII code P2714 mean on a 2016 Chevrolet Silverado?
P2714 indicates that the Powertrain Control Module (PCM) has detected that Pressure Control Solenoid Valve 4 is stuck in the "off" position, affecting transmission performance.
2. What are the common symptoms of code P2714 in a 2016 Chevrolet Silverado?
Symptoms include harsh or delayed shifting, slipping gears, transmission overheating, reduced fuel efficiency, and the Check Engine Light being illuminated.
3. What causes the P2714 code to appear in a Chevrolet Silverado?
Common causes include a faulty pressure control solenoid, low or dirty transmission fluid, an issue with the transmission valve body, wiring problems, or a malfunctioning PCM.
4. Can driving with a P2714 code damage my 2016 Silverado?
Yes, driving with this code can cause further damage to the transmission, especially if the issue involves low fluid or overheating.
5. How can I diagnose the P2714 code on my Silverado?
Start by checking the transmission fluid level and condition, inspecting solenoid wiring and connectors for damage, and using a diagnostic scanner to monitor solenoid operation.
6. How do I fix the P2714 code on a 2016 Chevrolet Silverado?
Repairs may involve replacing the faulty pressure control solenoid, cleaning or replacing the valve body, changing the transmission fluid and filter, or repairing damaged wiring.
7. Is the P2714 code expensive to fix on a Silverado?
Repair costs vary depending on the cause, but replacing a pressure control solenoid typically costs between $200 and $500, including parts and labor.
8. Can low or dirty transmission fluid trigger the P2714 code?
Yes, insufficient or contaminated transmission fluid can cause solenoid malfunctions, leading to the P2714 code.
9. How do I prevent the P2714 code from recurring?
Regularly maintain your transmission by checking and changing the fluid as recommended, inspecting wiring for damage, and addressing transmission issues promptly.
10. Can a faulty PCM cause the P2714 code in my Silverado?
While less common, a malfunctioning PCM can cause the P2714 code by failing to properly control the solenoid. This should be checked if other fixes don’t resolve the issue.
Discuss the causes and fixes for P2714 2016 Chevrolet Silverado OBDII Code
Code P2714 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
