AutoCodes – Toyota – P2714 2015 Toyota RAV4

P2714 2015 Toyota RAV4 Code - Pressure Control Solenoid 'D' Performance

Quick Answer

Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2714 2015 Toyota RAV4 indicates Pressure Control Solenoid 'D' Performance.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,645

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 12, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2714 2015 Toyota RAV4 Description

Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. The Engine Control Module (ECM) adjusts the current to the shift solenoid valve SLT to control hydraulic line pressure coming from the primary regulator valve. Appropriate line pressure assures smooth shifting with varying engine outputs.
The ECM calculates the amount of heat absorbed by the friction material based on the difference in speed (clutch slippage) between the turbine and output shaft. The ECM turns on the MIL and stores this Diagnostic Trouble Code (DTC) when the amount of heat absorption exceeds the specified value.
When the shift solenoid valve SLT remains on, the line pressure goes down, and the clutch engagement force decreases.

OBDII Code P2714 2015 Toyota RAV4 - Pressure Control Solenoid 'D' Performance - AutoCodes.com — P2714 2015 Toyota RAV4 Code - Pressure Control Solenoid 'D' Performance

What does this mean?

What are the Possible Causes of the DTC P2714 2015 Toyota RAV4?

Low transmission fluid level
Dirty transmission fluid
Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT)
Pressure Control Solenoid 'D' valve harness is open or shorted
Pressure Control Solenoid 'D' valve circuit poor electrical connection
Transmission valve body assembly is blocked
Faulty Automatic transaxle assembly

How to Fix the DTC P2714 2015 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

When a transmission solenoid malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is dirty, it's recommended to change the transmission fluid and if possible, remove the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a mechanical transmission failure, and that the transmission will need to be rebuilt or replaced.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2714 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2714 2015 Toyota RAV4 code?

Need more information on how to fix the P2714 2015 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2714 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2714 2015 Toyota RAV4 Code

1. What does the OBDII code P2714 mean for a 2015 Toyota RAV4?

P2714 refers to a performance issue with the Pressure Control Solenoid 'D,' which helps regulate hydraulic pressure in the transmission for smooth shifting.

2. What are the common symptoms of code P2714 in a 2015 Toyota RAV4?

Symptoms may include harsh or delayed shifting, transmission slipping, reduced fuel efficiency, and the Check Engine Light turning on.

3. What causes the P2714 code in a 2015 Toyota RAV4?

Common causes include a faulty pressure control solenoid, dirty or low transmission fluid, a damaged valve body, or wiring and electrical issues.

4. Can I drive my 2015 Toyota RAV4 with the P2714 code?

Driving with this code is not recommended as it can lead to further transmission damage or unsafe driving conditions due to poor shifting.

5. How is the P2714 code diagnosed in a 2015 Toyota RAV4?

A technician will use a scan tool to confirm the code, check the transmission fluid condition, inspect wiring and connectors, and test the solenoidâ€™s functionality.

6. How do I fix the P2714 code on my 2015 Toyota RAV4?

Repairs may include replacing the faulty pressure control solenoid, cleaning or replacing dirty transmission fluid, repairing damaged wiring, or replacing the valve body.

7. How much does it cost to repair the P2714 code on a 2015 Toyota RAV4?

Costs can vary, but solenoid replacement typically ranges from $200 to $500, depending on labor rates and parts pricing.

8. Can low transmission fluid cause the P2714 code in a 2015 Toyota RAV4?

Yes, low or dirty transmission fluid can cause insufficient hydraulic pressure, leading to solenoid performance issues and triggering the P2714 code.

9. Will resetting the Check Engine Light fix the P2714 code in my 2015 Toyota RAV4?

Resetting the light may clear the code temporarily, but the underlying issue must be addressed to prevent the code from returning.

10. How often should I check my transmission fluid to prevent the P2714 code?

Itâ€™s recommended to check your transmission fluid during regular maintenance, typically every 30,000 to 60,000 miles, or as specified in your ownerâ€™s manual.