P2714 2014 GMC Sierra Code - Pressure Control Solenoid Valve 4 Stuck Off
Quick Answer
The clutch pressure control solenoid 4 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2714 2014 GMC Sierra indicates Pressure Control Solenoid Valve 4 Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2714 2014 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio or neutral condition when the 2-6 clutch is commanded ON. This condition must occur 3 times.
What are the Possible Causes of the DTC P2714 2014 GMC Sierra?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2714 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2714 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2714 2014 GMC Sierra code?
Need more information on how to fix the P2714 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2714 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2714 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code P2714 in a 2014 GMC Sierra?
- Common symptoms include rough shifting, transmission slipping, poor acceleration, and the vehicle going into limp mode.
2. What does the OBDII code P2714 "Pressure Control Solenoid Valve 4 Stuck Off" indicate in a 2014 GMC Sierra?
- This code indicates a malfunction with the pressure control solenoid valve 4 in the transmission, causing it to remain in the off position.
3. What are the possible causes of OBDII code P2714 in a 2014 GMC Sierra?
- The code can be triggered by issues such as a faulty pressure control solenoid valve, low transmission fluid level, transmission fluid leaks, or electrical problems.
4. How serious is OBDII code P2714 in a 2014 GMC Sierra?
- This code should be addressed promptly to prevent further transmission damage and ensure the vehicle operates safely and efficiently.
5. How can I diagnose OBDII code P2714 in a 2014 GMC Sierra?
- Diagnosis involves using a scan tool to retrieve the code, checking the transmission fluid level and condition, inspecting for leaks, and testing the pressure control solenoid valve.
6. Can I continue driving my 2014 GMC Sierra with OBDII code P2714?
- It is not recommended to continue driving with this code active, as it can lead to further transmission issues and potential safety hazards.
7. How can I repair OBDII code P2714 in a 2014 GMC Sierra?
- Repair options may include replacing the pressure control solenoid valve, addressing any transmission fluid leaks, topping up the fluid level, or fixing any electrical issues.
8. Is it possible to clear OBDII code P2714 in a 2014 GMC Sierra without repairs?
- Clearing the code without addressing the underlying issue may temporarily turn off the check engine light, but the problem will likely reoccur and potentially worsen over time.
9. How much does it cost to fix OBDII code P2714 in a 2014 GMC Sierra?
- The cost of repairs can vary depending on the specific cause of the code, but it may involve parts and labor expenses ranging from a few hundred to a thousand dollars.
10. Can a DIY enthusiast repair OBDII code P2714 in a 2014 GMC Sierra?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to tackle simple repairs like replacing the pressure control solenoid valve, while more complex issues may require professional help.
Discuss the causes and fixes for P2714 2014 GMC Sierra OBDII Code
Code P2714 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
