P2714 2014 Chevrolet Silverado Code - Pressure Control Solenoid Valve 4 Stuck Off
Quick Answer
The clutch pressure control solenoid 4 is part of the control solenoid valve assembly, which has no serviceable parts. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2714 2014 Chevrolet Silverado indicates Pressure Control Solenoid Valve 4 Stuck Off.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Control Solenoid Valve Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2714 2014 Chevrolet Silverado Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module has detected an incorrect gear ratio or neutral condition when the 2-6 clutch is commanded ON. This condition must occur 3 times.
What are the Possible Causes of the DTC P2714 2014 Chevrolet Silverado?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness or connectors
- Control Solenoid Valve Assembly circuit is open or shorted
How to Fix the DTC P2714 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2714 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2714 2014 Chevrolet Silverado code?
Need more information on how to fix the P2714 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2714 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2714 2014 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code P2714 in a 2014 Chevrolet Silverado?
- Common symptoms include harsh shifting, transmission slipping, decreased fuel efficiency, and the Check Engine light being illuminated.
2. What does the OBDII code P2714, Pressure Control Solenoid Valve 4 Stuck Off, indicate in a 2014 Chevrolet Silverado?
- This code indicates that the transmission control module has detected an issue with the pressure control solenoid valve 4 being stuck in the off position.
3. What are the possible causes of the Pressure Control Solenoid Valve 4 Stuck Off code in a 2014 Chevrolet Silverado?
- The possible causes may include a faulty pressure control solenoid valve, low transmission fluid level, dirty or contaminated transmission fluid, or a malfunctioning transmission control module.
4. Can driving with OBDII code P2714 in a 2014 Chevrolet Silverado cause further damage?
- Continuing to drive with this code may lead to increased wear and potential damage to the transmission components, so it is advisable to address the issue promptly.
5. How can I diagnose and repair OBDII code P2714 in a 2014 Chevrolet Silverado?
- Diagnosing and repairing this code typically involves checking the transmission fluid level and condition, inspecting the pressure control solenoid valve, and scanning the transmission control module for further diagnostics.
6. Is it safe to continue driving my 2014 Chevrolet Silverado with the Pressure Control Solenoid Valve 4 Stuck Off code?
- It is not recommended to drive the vehicle with this code present, as it can lead to transmission issues and potentially more costly repairs in the future.
7. Can I reset the Check Engine light after fixing OBDII code P2714 in my 2014 Chevrolet Silverado?
- Yes, after the issue causing the code has been repaired, the Check Engine light can be reset using an OBDII scanner to clear the code.
8. Is it possible to fix OBDII code P2714 in a 2014 Chevrolet Silverado without professional help?
- While some DIY enthusiasts may attempt to address this code, it is recommended to seek professional help, especially when dealing with transmission-related issues for accurate diagnosis and repair.
9. How much does it typically cost to repair OBDII code P2714 in a 2014 Chevrolet Silverado?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing the pressure control solenoid valve or addressing related transmission issues, potentially ranging from a few hundred to over a thousand dollars.
10. Will fixing OBDII code P2714 improve the performance and drivability of my 2014 Chevrolet Silverado?
- Yes, resolving this code should lead to improved transmission performance, smoother shifting, better fuel efficiency, and overall enhanced drivability of the vehicle.
Discuss the causes and fixes for P2714 2014 Chevrolet Silverado OBDII Code
Code P2714 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
