P2714 2013 Toyota RAV4 Code - Pressure Control Solenoid 'D' Performance
Quick Answer
Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2714 2013 Toyota RAV4 indicates Pressure Control Solenoid 'D' Performance.
- Common causes
- Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2714 2013 Toyota RAV4 Description
The ECM calculates the amount of heat absorbed by the friction material based on the difference in speed (clutch slippage) between the turbine and output shaft. The ECM turns on the MIL and stores this Diagnostic Trouble Code (DTC) when the amount of heat absorption exceeds the specified value.
When the shift solenoid valve SLT remains on, the line pressure goes down, and the clutch engagement force decreases.
What are the Possible Causes of the DTC P2714 2013 Toyota RAV4?
- Low transmission fluid level
- Dirty transmission fluid
- Faulty Pressure Control Solenoid 'D' valve (Shift Solenoid Valve SLT)
- Pressure Control Solenoid 'D' valve harness is open or shorted
- Pressure Control Solenoid 'D' valve circuit poor electrical connection
- Transmission valve body assembly is blocked
- Faulty Automatic transaxle assembly
How to Fix the DTC P2714 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2714 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2714 2013 Toyota RAV4 code?
Need more information on how to fix the P2714 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2714 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2714 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P2714 in a 2013 Toyota RAV4?
The common symptoms include harsh shifting, issues with gear engagement, and potential transmission slippage.
2. What could cause the OBDII code P2714 in a 2013 Toyota RAV4?
The likely causes of this code include a malfunctioning pressure control solenoid 'D', low transmission fluid levels, or a faulty transmission control module.
3. How serious is the OBDII code P2714 in a 2013 Toyota RAV4?
This code should be addressed promptly as it can lead to further damage to the transmission if left unresolved.
4. Can I drive my 2013 Toyota RAV4 with the OBDII code P2714?
It is not recommended to drive the vehicle with this code present to prevent potential transmission damage. It's advisable to have the issue diagnosed and repaired as soon as possible.
5. What are some DIY repair tips for OBDII code P2714 in a 2013 Toyota RAV4?
DIY repair tips may include checking and filling transmission fluid levels, inspecting wiring connections, and testing the pressure control solenoid 'D' for proper function.
6. How can I reset the OBDII code P2714 in a 2013 Toyota RAV4?
After addressing the underlying issue, the code can be reset using an OBDII scanner or by disconnecting the car battery for a few minutes.
7. Is it necessary to visit a mechanic for OBDII code P2714 in a 2013 Toyota RAV4?
Given the complexity of transmission systems, it's recommended to have a qualified mechanic diagnose and repair the issue to ensure proper resolution.
8. What is the typical cost to repair OBDII code P2714 in a 2013 Toyota RAV4?
The cost of repair can vary depending on the exact cause of the code, but it may involve replacing the pressure control solenoid 'D' or addressing other transmission-related issues.
9. How common is the OBDII code P2714 in a 2013 Toyota RAV4?
While not as common as some other OBDII codes, P2714 can still occur in a 2013 Toyota RAV4 due to various transmission system malfunctions.
10. Can neglecting the OBDII code P2714 lead to more severe transmission problems in a 2013 Toyota RAV4?
Yes, neglecting this code can potentially lead to more severe transmission issues, resulting in costly repairs if not addressed promptly.
Discuss the causes and fixes for P2714 2013 Toyota RAV4 OBDII Code
Code P2714 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
