P2712 Code - Hydraulic Power Unit Leakage
Quick Answer
P2712 indicates Hydraulic Power Unit Leakage. Common causes include Internal hydraulic leaks of the transmission fluid, Faulty Electronic Pressure Control Solenoid, Electronic Pressure Control Solenoid harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2712 indicates Hydraulic Power Unit Leakage.
- Common causes
- Common causes include Internal hydraulic leaks of the transmission fluid, Faulty Electronic Pressure Control Solenoid, Electronic Pressure Control Solenoid harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2712 Description
What are the Possible Causes of the DTC P2712?
- Internal hydraulic leaks of the transmission fluid
- Faulty Electronic Pressure Control Solenoid
- Electronic Pressure Control Solenoid harness is open or shorted
- Electronic Pressure Control Solenoid circuit poor electrical connection
How to Fix the DTC P2712?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2712 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2712 code?
Need more information on how to fix the P2712 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2712 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P2712 Dodge — Hydraulic Power Unit Leakage
Frequently Asked Questions about P2712 Code
1. What are common symptoms of OBDII code P2712 (Hydraulic Power Unit Leakage)?
Common symptoms include rough shifting, difficulty engaging gears, and potential loss of hydraulic fluid.
2. What can cause OBDII code P2712 to trigger?
This code is typically triggered by a leak in the hydraulic power unit, which can be caused by damaged seals, cracks in the unit, or loose fittings.
3. How serious is a Hydraulic Power Unit Leakage issue related to code P2712?
A hydraulic power unit leakage can lead to significant transmission problems if left unrepaired, potentially resulting in complete transmission failure.
4. How can I diagnose a Hydraulic Power Unit Leakage causing OBDII code P2712?
Diagnosing the issue usually involves inspecting the hydraulic power unit, checking for visible leaks, and performing a pressure test to pinpoint the source of the leakage.
5. Can I continue driving with OBDII code P2712 present?
It is not recommended to continue driving with this code active, as it can lead to further damage to the transmission system and potentially unsafe driving conditions.
6. What are some repair tips for fixing a Hydraulic Power Unit Leakage issue?
Repair tips include replacing damaged seals, repairing cracks in the hydraulic unit, tightening loose fittings, and ensuring proper fluid levels.
7. How much does it typically cost to repair a Hydraulic Power Unit Leakage issue associated with OBDII code P2712?
The cost of repair can vary depending on the extent of the damage, but it may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can a DIY enthusiast fix a Hydraulic Power Unit Leakage problem caused by OBDII code P2712?
While some experienced DIY enthusiasts may be able to address minor leaks or seal replacements, it is generally recommended to have a professional mechanic handle hydraulic power unit repairs.
9. How long does it take to repair a Hydraulic Power Unit Leakage issue linked to OBDII code P2712?
The repair time can vary based on the specific problem and the mechanic's expertise, but it typically takes a few hours to a day to address a hydraulic power unit leakage properly.
10. Is it necessary to reset the OBDII code P2712 after repairing a Hydraulic Power Unit Leakage?
Yes, it is important to clear the code after fixing the issue to ensure the vehicle's computer recognizes that the problem has been resolved and to prevent any further issues related to the code.
Discuss the causes and fixes for P2712 OBDII Code
Code P2712 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
