AutoCodes – RAM – P2706 RAM

P2706 RAM Code - Shift Solenoid 'F'

Quick Answer

The Transmission Control System uses six electronically controlled solenoids that allow hydraulic fluid to be applied to various friction elements (clutches), which enables the gear requested. Common causes include Dirty or Low Transmission Fluid, Faulty Shift Solenoid 'F', Shift Solenoid 'F' harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2706 RAM indicates Shift Solenoid 'F'.
Common causes: Common causes include Dirty or Low Transmission Fluid, Faulty Shift Solenoid 'F', Shift Solenoid 'F' harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,255

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Dec 27, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2706 RAM Description

The Transmission Control System uses six electronically controlled solenoids that allow hydraulic fluid to be applied to various friction elements (clutches), which enables the gear requested. The continuity of each solenoid circuit is periodically tested. Each inactive solenoid is turned on for a few milliseconds, then off. Each active solenoid is turned off for a few milliseconds, then on. This pulsing of voltage to the solenoid causes an inductive spike which can be sensed by the Transmission Control System. If an inductive spike is not sensed by the Transmission Control System during the continuity check, it is tested again. If the test fails three consecutive times, the appropriate Diagnostic Trouble Code (DTC) is set. If the solenoid test is run in response to a gear ratio or pressure switch error, one failure will result in setting the appropriate DTC.

OBDII Code P2706 RAM - Shift Solenoid 'F' - AutoCodes.com — P2706 RAM Code - Shift Solenoid 'F'

What does this mean?

What are the Possible Causes of the DTC P2706 RAM?

Dirty or Low Transmission Fluid
Faulty Shift Solenoid 'F'
Shift Solenoid 'F' harness is open or shorted
Shift Solenoid 'F' circuit poor electrical connection

How to Fix the DTC P2706 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2706 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2706 RAM code?

Need more information on how to fix the P2706 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2706 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2706 RAM Code

1. What are the common symptoms of OBDII code P2706 Shift Solenoid 'F' malfunction?

- Common symptoms include harsh shifting, delayed shifting, transmission slipping, and the transmission getting stuck in a particular gear.

2. What are the possible causes of OBDII code P2706 Shift Solenoid 'F'?

- The code P2706 can be caused by a faulty shift solenoid 'F', low transmission fluid level, dirty transmission fluid, or a defective transmission control module.

3. How can I diagnose the cause of OBDII code P2706 Shift Solenoid 'F'?

- Diagnosing the issue may involve checking the transmission fluid level and condition, inspecting the shift solenoid 'F' for proper operation, and scanning the transmission control module for error codes.

4. Can I continue driving with OBDII code P2706 Shift Solenoid 'F' present?

- It is not recommended to continue driving with this code as it can lead to further damage to the transmission and potentially result in complete transmission failure.

5. How can I repair OBDII code P2706 Shift Solenoid 'F'?

- Repairing the issue may involve replacing the faulty shift solenoid 'F', performing a transmission fluid flush and filter replacement, or reprogramming the transmission control module.

6. Are there any DIY tips for fixing OBDII code P2706 Shift Solenoid 'F'?

- While some basic troubleshooting like checking the transmission fluid level can be done by DIY enthusiasts, it is recommended to have a qualified mechanic diagnose and repair the specific issue with the shift solenoid.

7. Is OBDII code P2706 Shift Solenoid 'F' a common problem in certain vehicle makes and models?

- This code can be more prevalent in certain vehicle makes and models that are equipped with automatic transmissions, particularly in vehicles with high mileage or inadequate maintenance history.

8. Can a faulty shift solenoid 'F' cause other transmission issues besides OBDII code P2706?

- Yes, a malfunctioning shift solenoid 'F' can cause a variety of transmission issues such as erratic shifting, gear slippage, and difficulty engaging certain gears.

9. How much does it typically cost to repair OBDII code P2706 Shift Solenoid 'F' at a mechanic's shop?

- The cost of repairing this issue can vary depending on the extent of the problem, but it may range from $200 to $600 for parts and labor.

10. Will resetting the OBDII code P2706 Shift Solenoid 'F' resolve the issue permanently?

- Simply resetting the code may temporarily clear the warning light, but if the underlying issue with the shift solenoid 'F' is not addressed, the code is likely to reappear.