P2705 Dodge Code - Transmission Friction Element 'F' Apply Time Range/Performance
Quick Answer
The Power Steering Control Module (PSCM) will monitor the amount of force needed to assist with vehicle steering when the ignition is ON and the voltage supply to the PSCM is above 6 volts, all other Electric Power-Assisted Steering (EPAS) sensors are functioning correctly and the EPAS gear is providing assist. Common causes include Low tire air pressure, Damaged steering gear bellows boot, Contaminated gear/rack. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2705 Dodge indicates Transmission Friction Element 'F' Apply Time Range/Performance.
- Common causes
- Common causes include Low tire air pressure, Damaged steering gear bellows boot, Contaminated gear/rack.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2705 Dodge Description
functioning correctly and the EPAS gear is providing assist.
What are the Possible Causes of the DTC P2705 Dodge?
- Low tire air pressure
- Damaged steering gear bellows boot
- Contaminated gear/rack
- Inner tie rods
- Steering gear internal failure
How to Fix the DTC P2705 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2705 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2705 Dodge code?
Need more information on how to fix the P2705 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2705 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2705 Dodge Code
What does the OBDII code P2705 mean on a Dodge vehicle?
The P2705 code indicates an issue with the transmission friction element 'F,' specifically that its apply time is outside the expected range or performance parameters.
What are the common symptoms of code P2705 in a Dodge?
Symptoms may include erratic or delayed shifting, slipping gears, the transmission being stuck in one gear, reduced fuel efficiency, or the illumination of the Check Engine Light.
What are the possible causes of the P2705 code in a Dodge?
Common causes include low transmission fluid levels, dirty or contaminated fluid, a faulty transmission solenoid, internal transmission wear, or an issue with the transmission control module (TCM).
Can low transmission fluid cause the P2705 code?
Yes, insufficient or degraded transmission fluid can lead to poor hydraulic pressure, affecting the operation of friction element 'F' and triggering the P2705 code.
How do you diagnose the P2705 code on a Dodge?
Diagnosis typically involves checking transmission fluid levels and condition, scanning for additional codes, inspecting the wiring and connectors to the TCM, and testing the transmission solenoids and internal components.
Can I drive with the P2705 code on my Dodge?
Driving with the P2705 code is not recommended, as it can lead to further transmission damage or unsafe driving conditions due to erratic gear shifting.
How do you fix the P2705 code on a Dodge?
Repairs may include replacing or repairing the transmission solenoid, flushing and replacing the transmission fluid, fixing damaged wiring or connectors, or rebuilding the transmission if internal damage exists.
How much does it cost to repair a P2705 code on a Dodge?
Repair costs vary depending on the issue, ranging from $150 for a transmission fluid change to $1,500 or more for a solenoid replacement or transmission rebuild.
Can a software update fix the P2705 code in a Dodge?
In some cases, a software update to the transmission control module (TCM) may resolve the issue if it was caused by a programming error.
What tools are needed to diagnose the P2705 code in a Dodge?
You’ll need an OBDII scanner, a multimeter to test electrical components, and possibly a transmission pressure gauge for more in-depth diagnosis.
Discuss the causes and fixes for P2705 Dodge OBDII Code
Code P2705 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
