P2703 Ford Code - Transmission Friction Element 'D' Apply Time Range/Performance
Quick Answer
The intermediate (SSPC-C), low/reverse (SSPC-E) and overdrive (SSPC-B) clutches are each controlled by a directly proportional variable force shift (VFS) solenoid. Common causes include Faulty Direct Clutch Solenoid, Direct Clutch Solenoid harness is open or shorted, Direct Clutch Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2703 Ford indicates Transmission Friction Element 'D' Apply Time Range/Performance.
- Common causes
- Common causes include Faulty Direct Clutch Solenoid, Direct Clutch Solenoid harness is open or shorted, Direct Clutch Solenoid circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2703 Ford Description
The PCM monitors the Direct Clutch. The Diagnostic Trouble Code (DTC) will set when the PCM has detected a failure within the direct clutch system.
What are the Possible Causes of the DTC P2703 Ford?
- Faulty Direct Clutch Solenoid
- Direct Clutch Solenoid harness is open or shorted
- Direct Clutch Solenoid circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P2703 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2703 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2703 Ford code?
Need more information on how to fix the P2703 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2703 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2703 Ford Code
1. What are common symptoms of OBDII code P2703 in a Ford related to the Transmission Friction Element 'D' Apply Time Range/Performance issue?
- Common symptoms include harsh shifting, slippage, delayed engagement, and potential transmission overheating.
2. What can cause the OBDII code P2703 to trigger in a Ford vehicle?
- The code can be triggered by issues with the transmission friction element 'D', such as a malfunctioning solenoid, low transmission fluid level, or internal hydraulic pressure problems.
3. How can I diagnose the root cause of OBDII code P2703 in my Ford related to the Transmission Friction Element 'D' Apply Time Range/Performance?
- Diagnosing the issue may involve conducting a thorough inspection of the transmission system, checking for fluid leaks, performing a transmission fluid level and condition check, and using a scan tool to monitor sensor data.
4. What are some repair tips for fixing OBDII code P2703 in a Ford vehicle?
- Repair tips may include replacing the faulty transmission friction element 'D', checking and correcting the transmission fluid level and condition, inspecting and repairing any damaged wiring or connectors, and performing a transmission control module reprogramming if necessary.
5. Can driving with OBDII code P2703 in a Ford vehicle cause further damage?
- Continuing to drive with the code may lead to further transmission issues, reduced fuel efficiency, and potential long-term damage to the transmission system.
6. How much does it typically cost to repair OBDII code P2703 in a Ford vehicle?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred dollars for minor repairs to over a thousand dollars for more extensive transmission repairs.
7. Is it safe to continue driving my Ford with OBDII code P2703 present?
- It is not recommended to continue driving the vehicle with the code present, as it can lead to further transmission damage and potentially unsafe driving conditions.
8. Can I reset the OBDII code P2703 in my Ford without repairing the underlying issue?
- While you can clear the code using an OBDII scanner, it is not recommended to do so without addressing the root cause, as the issue may persist and cause further problems down the line.
9. Are there any preventative maintenance steps I can take to avoid OBDII code P2703 in my Ford?
- Regularly checking and maintaining proper transmission fluid levels, following the manufacturer's recommended service intervals, and addressing any transmission issues promptly can help prevent the code from appearing.
10. How long does it typically take to repair OBDII code P2703 related to the Transmission Friction Element 'D' Apply Time Range/Performance in a Ford vehicle?
- The repair time can vary depending on the exact cause of the issue and the extent of the repairs needed, but it may take anywhere from a few hours to a full day at a repair shop or dealership.
Discuss the causes and fixes for P2703 Ford OBDII Code
Code P2703 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
