P2703 Dodge Code - Transmission Friction Element 'D' Apply Time Range/Performance
Quick Answer
The Power Steering Control Module (PSCM) will monitor the amount of force needed to assist with vehicle steering when the ignition is ON and the voltage supply to the PSCM is above 6 volts, all other Electric Power-Assisted Steering (EPAS) sensors are functioning correctly and the EPAS gear is providing assist. Common causes include Low tire air pressure, Damaged steering gear bellows boot, Contaminated gear/rack. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2703 Dodge indicates Transmission Friction Element 'D' Apply Time Range/Performance.
- Common causes
- Common causes include Low tire air pressure, Damaged steering gear bellows boot, Contaminated gear/rack.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2703 Dodge Description
functioning correctly and the EPAS gear is providing assist.
What are the Possible Causes of the DTC P2703 Dodge?
- Low tire air pressure
- Damaged steering gear bellows boot
- Contaminated gear/rack
- Inner tie rods
- Steering gear internal failure
How to Fix the DTC P2703 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2703 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2703 Dodge code?
Need more information on how to fix the P2703 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2703 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2703 Dodge Code
What does the OBDII code P2703 mean on a Dodge vehicle?
P2703 indicates an issue with the transmission friction element "D," specifically that its apply time is outside the expected range or performance parameters.
What are common symptoms of a P2703 code?
Symptoms may include harsh or delayed shifting, transmission slipping, warning lights on the dashboard, or reduced vehicle performance.
What causes the P2703 code on a Dodge?
Common causes include low or dirty transmission fluid, a malfunctioning solenoid, a worn-out clutch or friction element, or internal transmission damage.
Can I drive with a P2703 code?
While the vehicle may still move, driving with this code can lead to further transmission damage and should be addressed promptly.
How do I diagnose a P2703 code?
Diagnosis typically involves scanning the vehicle with an OBDII scanner, checking transmission fluid levels and condition, inspecting wiring and solenoids, and possibly performing a hydraulic pressure test.
Can low transmission fluid trigger a P2703 code?
Yes, low or contaminated transmission fluid can cause improper operation of the friction element and trigger the P2703 code.
How much does it cost to fix a P2703 code?
Repair costs vary depending on the cause, ranging from a simple fluid change ($100-$200) to solenoid replacement ($200-$500) or more extensive transmission repairs ($1,000+).
What should I check first when troubleshooting a P2703 code?
Start by inspecting the transmission fluid for proper level and condition, as this is the simplest and most common issue.
Can a bad transmission solenoid cause the P2703 code?
Yes, a faulty solenoid responsible for controlling the friction element "D" can result in apply time performance issues.
Will resetting the code fix the P2703 issue?
Clearing the code will remove the warning temporarily, but if the underlying issue is not resolved, the code will likely return.
Discuss the causes and fixes for P2703 Dodge OBDII Code
Code P2703 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
