P2694 Ford Code - Cylinder 9 Injector Data Incompatible
Quick Answer
Each injector has a code stored in Electrically Erasable Programmable Read-Only Memory (EEPROM) that provides information to the Electronic Control Unit (ECU) about deviations of that injector from a theoretical average injector. Common causes include Program Injector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2694 Ford indicates Cylinder 9 Injector Data Incompatible.
- Common causes
- Common causes include Program Injector.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2694 Ford Description
How to Fix the DTC P2694 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2694 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2694 Ford code?
Need more information on how to fix the P2694 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2694 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2694 Ford Code
1. What does the OBDII code P2694 mean on a Ford?
P2694 indicates that the Engine Control Module (ECM) has detected incompatible or out-of-range data from the cylinder 9 fuel injector.
2. What are the symptoms of the P2694 code on a Ford vehicle?
Common symptoms include rough idling, reduced engine performance, poor fuel efficiency, and possibly a check engine light.
3. What causes the P2694 code to appear on a Ford?
Possible causes include a faulty cylinder 9 fuel injector, wiring issues, a damaged ECM, or incorrect injector calibration.
4. Can I drive my Ford with the P2694 code?
It’s not recommended, as driving with this code can lead to further engine damage or decreased performance.
5. How can I fix the P2694 code on my Ford?
Repairs may involve inspecting and replacing the cylinder 9 fuel injector, repairing damaged wiring, or reprogramming the ECM.
6. How do I diagnose the P2694 code on a Ford?
Start by scanning for codes, inspecting the cylinder 9 fuel injector and its wiring, and checking for software updates for the ECM.
7. Does the P2694 code always mean the injector is bad?
No, it could also be caused by faulty wiring, a communication issue, or ECM problems rather than the injector itself.
8. What tools are needed to troubleshoot the P2694 code?
You’ll need an OBDII scanner, a multimeter for wiring checks, and potentially dealer-level software for ECM diagnostics or reprogramming.
9. How much does it cost to repair the P2694 code on a Ford?
Costs vary depending on the issue but can range from $150 for a wiring repair to $500 or more for injector replacement or ECM reprogramming.
10. Can a dirty fuel injector cause the P2694 code on a Ford?
Yes, a clogged or dirty injector can disrupt data compatibility and trigger this code. Cleaning or replacing the injector may resolve the issue.
Discuss the causes and fixes for P2694 Ford OBDII Code
Code P2694 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
