P2670 Buick Code - Actuator High Control Circuit Group 2 Low Voltage
Quick Answer
The Transmission Control Module (TCM) receives information from a variety of sensors, switches, and serial data information from other control modules. Common causes include Faulty Transmission Control Solenoid Valve, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2670 Buick indicates Actuator High Control Circuit Group 2 Low Voltage.
- Common causes
- Common causes include Faulty Transmission Control Solenoid Valve, Faulty Transmission Control Module (TCM), Transmission Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2670 Buick Description
What are the Possible Causes of the DTC P2670 Buick?
- Faulty Transmission Control Solenoid Valve
- Faulty Transmission Control Module (TCM)
- Transmission Control Module harness is open or shorted
- Transmission Control Module circuit poor electrical connection
How to Fix the DTC P2670 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2670 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2670 Buick code?
Need more information on how to fix the P2670 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2670 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2670 Buick Code
1. What does the OBDII code P2670 mean on a Buick?
The P2670 code indicates a "Actuator High Control Circuit Group 2 Low Voltage," meaning the control circuit for a specific actuator in Group 2 is experiencing low voltage.
2. What are the common symptoms of the P2670 code in a Buick?
Symptoms can include a check engine light, reduced engine performance, poor fuel economy, or erratic operation of certain components controlled by the affected actuator.
3. What causes the P2670 code to appear in a Buick?
Common causes include a faulty actuator, damaged wiring, corroded connectors, a blown fuse, or a malfunctioning control module.
4. How can I diagnose the P2670 code on my Buick?
Start by inspecting the wiring, connectors, and fuses related to Group 2 actuators for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.
5. Can I drive my Buick with the P2670 code?
While the car may still be operable, driving with this code can lead to reduced performance and may cause further damage to the affected components if not addressed promptly.
6. How do I fix the P2670 code in my Buick?
Repairs may include replacing or repairing damaged wiring, cleaning corroded connectors, replacing the faulty actuator, or addressing issues with the control module.
7. How much does it cost to fix the P2670 code on a Buick?
Repair costs vary depending on the cause but typically range from $100 to $500, including parts and labor.
8. Can a bad battery cause the P2670 code in a Buick?
Yes, a weak or failing battery can result in low voltage and potentially trigger the P2670 code.
9. Will clearing the P2670 code fix the problem?
Clearing the code may temporarily remove the check engine light, but the underlying issue must be resolved to prevent the code from returning.
10. What tools are needed to troubleshoot the P2670 code on a Buick?
Tools like an OBDII scanner, multimeter, and basic hand tools are commonly used to diagnose and fix this code.
Discuss the causes and fixes for P2670 Buick OBDII Code
Code P2670 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
