P2640 Chevrolet Code - Torque Management Feedback Signal 'A' High
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2640 Chevrolet indicates Torque Management Feedback Signal 'A' High.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2640 Chevrolet Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2640 Chevrolet?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2640 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2640 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2640 Chevrolet code?
Need more information on how to fix the P2640 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2640 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2640 Chevrolet Code
1. What does OBDII code P2640 mean for a Chevrolet?
P2640 indicates a problem with the Torque Management Feedback Signal 'A' being higher than expected, which could interfere with engine or transmission performance.
2. What are common symptoms of code P2640 in a Chevrolet?
Symptoms may include reduced engine performance, poor acceleration, transmission shifting issues, or the check engine light illuminating.
3. What causes the P2640 code to appear on a Chevrolet?
Possible causes include a faulty torque management sensor, damaged wiring or connectors, or issues within the engine control module (ECM).
4. Can I drive my Chevrolet with the P2640 code active?
Driving with this code may lead to reduced performance and potential damage to the drivetrain components. It's best to address the issue promptly.
5. How is the P2640 code diagnosed in a Chevrolet?
Technicians use an OBDII scanner to read the code and check related sensors, wiring, and signal voltages for irregularities.
6. What repairs can fix the P2640 code on a Chevrolet?
Repairs may include replacing the torque management sensor, fixing damaged wiring or connectors, or reprogramming or replacing the ECM.
7. How much does it cost to repair the P2640 code on a Chevrolet?
Costs vary depending on the exact issue but can range from $100 for simple wiring repairs to over $500 for sensor or ECM replacements.
8. Can a dirty or faulty sensor cause the P2640 code on a Chevrolet?
Yes, a dirty or malfunctioning torque management sensor can send incorrect signals, triggering this code.
9. Is the P2640 code related to transmission problems in a Chevrolet?
Yes, this code can affect torque management, potentially leading to transmission shifting issues.
10. How can I prevent the P2640 code from happening again on my Chevrolet?
Regular maintenance, including checking wiring and sensors, can help prevent this code from recurring.
Discuss the causes and fixes for P2640 Chevrolet OBDII Code
Code P2640 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
