P2639 Chevrolet Code - Torque Management Feedback Signal 'A' Low
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2639 Chevrolet indicates Torque Management Feedback Signal 'A' Low.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2639 Chevrolet Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2639 Chevrolet?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2639 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2639 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2639 Chevrolet code?
Need more information on how to fix the P2639 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2639 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2639 Chevrolet Code
1. What are the common symptoms of OBDII code P2639 in a Chevrolet vehicle?
- Common symptoms may include reduced engine power, hesitation during acceleration, and the check engine light being illuminated.
2. What causes the Torque Management Feedback Signal 'A' Low fault code P2639 in a Chevrolet?
- The code is typically triggered by issues with the torque management system, such as a faulty torque sensor, damaged wiring, or a malfunctioning electronic control module (ECM).
3. How serious is the P2639 error code in a Chevrolet?
- While the vehicle may still be operable with reduced performance, it is important to address this code promptly to prevent potential damage to the engine or transmission.
4. Can driving with the P2639 code harm the Chevrolet vehicle?
- Continuing to drive with this code may lead to further damage to the engine or transmission, so it is recommended to address the issue as soon as possible.
5. How can I diagnose the P2639 code in my Chevrolet?
- Diagnosing this code typically involves using a diagnostic scanner to retrieve the trouble codes, inspecting the torque sensor and related components, and checking for any loose or damaged wiring.
6. What are some repair tips for fixing the Torque Management Feedback Signal 'A' Low code in a Chevrolet?
- Repair tips may include checking and replacing the torque sensor, repairing any damaged wiring, resetting the ECM, and ensuring all connections are secure.
7. Can I fix the P2639 code in my Chevrolet at home, or should I take it to a mechanic?
- Depending on your level of automotive expertise, you may be able to address this code at home by following a repair manual or utilizing online resources. However, if you are unsure, it is best to seek assistance from a qualified mechanic.
8. Are there any recalls or technical service bulletins related to the P2639 code in Chevrolet vehicles?
- It is recommended to check with Chevrolet or a local dealership to see if there are any known recalls or technical service bulletins related to this specific OBDII code.
9. How much does it typically cost to repair the P2639 code in a Chevrolet?
- The cost of repairs can vary depending on the specific issue causing the code, the labor rates in your area, and whether you choose to address the problem yourself or take it to a professional mechanic.
10. How long can it take to fix the Torque Management Feedback Signal 'A' Low fault code in a Chevrolet?
- The repair time can vary based on the complexity of the issue, the availability of parts, and whether you are performing the repairs yourself or relying on a mechanic.
Discuss the causes and fixes for P2639 Chevrolet OBDII Code
Code P2639 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
