P2626 BMW Code - Upstream Oxygen Sensor Open Circuit Monitoring Trim Current Failure Bank 1
Quick Answer
The oxygen sensor circuit monitoring detects the following malfunctions by evaluating the error information received from oxygen sensor monitoring functions. Common causes include Faulty Upstream Oxygen Sensor Bank 1, Upstream Oxygen Sensor Bank 1 harness is open or shorted, Upstream Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2626 BMW indicates Upstream Oxygen Sensor Open Circuit Monitoring Trim Current Failure Bank 1.
- Common causes
- Common causes include Faulty Upstream Oxygen Sensor Bank 1, Upstream Oxygen Sensor Bank 1 harness is open or shorted, Upstream Oxygen Sensor Bank 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2626 BMW Description
This function shall be triggered only if one of the following diagnosis is active (to set the readiness bit), which are 'Upstream Oxygen Sensor - Signal Monitoring During Fuel Cut-off' and 'Upstream Oxygen Sensor - Heater Monitoring'. The function shall go to the state = “active” only if one of the above diagnosis detected a fault.
If the sensor shows an augmented gain, i.e. the sensor signal is higher than the nominal characteristic line, the plausibility test during the fuel cutoff phase shall detect this symptom (signal voltage above e.g. 5,6 V *) during fuel cut off) and an Open Circuit is assigned to the line, Trim Current.
What are the Possible Causes of the DTC P2626 BMW?
- Faulty Upstream Oxygen Sensor Bank 1
- Upstream Oxygen Sensor Bank 1 harness is open or shorted
- Upstream Oxygen Sensor Bank 1 circuit poor electrical connection
How to Fix the DTC P2626 BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2626 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2626 BMW code?
Need more information on how to fix the P2626 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2626 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2626 BMW Code
1. What are the common symptoms of OBDII code P2626 in a BMW?
Common symptoms of P2626 may include poor fuel economy, rough idling, engine misfires, and the illumination of the Check Engine Light.
2. What can cause the Upstream Oxygen Sensor Open Circuit Monitoring Trim Current Failure Bank 1 code in a BMW?
Possible causes of P2626 include a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or issues with the engine control module.
3. How serious is OBDII code P2626 in a BMW?
While P2626 may not cause immediate drivability issues, it can negatively impact fuel efficiency and overall engine performance if left unresolved.
4. How can I diagnose OBDII code P2626 in my BMW?
Diagnosing P2626 typically involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and related wiring, and performing voltage tests to determine the root cause.
5. Can I drive my BMW with OBDII code P2626?
It is generally not recommended to drive your BMW with an unresolved P2626 code, as it can lead to further engine damage and decreased fuel efficiency over time.
6. How much does it cost to repair OBDII code P2626 in a BMW?
The cost of repairing P2626 can vary depending on the underlying issue, but it may involve replacing the oxygen sensor, repairing damaged wiring, or addressing other related components.
7. Can I reset the Check Engine Light caused by OBDII code P2626 in my BMW?
Resetting the Check Engine Light without addressing the underlying issue causing P2626 is not recommended, as the light will likely reappear once the problem persists.
8. Are there any DIY repair tips for fixing OBDII code P2626 in a BMW?
While diagnosing and repairing P2626 may require specialized tools and knowledge, checking the oxygen sensor connections and visually inspecting the wiring for damage can be good starting points for DIY enthusiasts.
9. Will OBDII code P2626 cause my BMW to fail an emissions test?
If left unresolved, P2626 can lead to increased emissions and potentially cause your BMW to fail an emissions test, as the oxygen sensor plays a crucial role in monitoring and adjusting fuel mixture.
10. How long does it take to repair OBDII code P2626 in a BMW?
The repair time for P2626 can vary based on the specific cause of the code and the complexity of the repair needed, ranging from a quick sensor replacement to more extensive troubleshooting and repairs.
Discuss the causes and fixes for P2626 BMW OBDII Code
Code P2626 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
