AutoCodes – Dodge – P2622 Dodge

P2622 Dodge Code - Throttle Position Output Circuit High

Quick Answer

The Engine Control Module (ECM) monitors the Throttle Position circuit signal. Common causes include Faulty Throttle Position Sensor/Switch, Throttle Position Sensor/Switch harness is open or shorted, Throttle Position Sensor/Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P2622 Dodge indicates Throttle Position Output Circuit High.
Common causes
Common causes include Faulty Throttle Position Sensor/Switch, Throttle Position Sensor/Switch harness is open or shorted, Throttle Position Sensor/Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,494
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 22, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P2622 Dodge Description

The Engine Control Module (ECM) monitors the Throttle Position circuit signal. The ECM sets the OBDII Code when the Throttle Position circuit signal is out of factory specifications.
OBDII Code P2622 Dodge - Throttle Position Output Circuit High - AutoCodes.com
P2622 Dodge Code - Throttle Position Output Circuit High

What are the Possible Causes of the DTC P2622 Dodge?

  • Faulty Throttle Position Sensor/Switch
  • Throttle Position Sensor/Switch harness is open or shorted
  • Throttle Position Sensor/Switch circuit poor electrical connection

How to Fix the DTC P2622 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2622 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2622 Dodge code?

Need more information on how to fix the P2622 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2622 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2622 Dodge Code

1. What does the OBDII code P2622 mean on a Dodge vehicle?

Code P2622 indicates a problem with the throttle position output circuit, specifically that the circuit voltage is higher than expected.

2. What are the common symptoms of the P2622 code in a Dodge?

Symptoms may include poor throttle response, reduced engine performance, stalling, or the Check Engine Light illuminating.

3. What causes the P2622 code to appear in Dodge vehicles?

Common causes include a faulty throttle position sensor (TPS), damaged wiring or connectors in the TPS circuit, or issues with the vehicle's engine control module (ECM).

4. Can I drive my Dodge with the P2622 code active?

Driving with this code is not recommended, as it may lead to unsafe driving conditions due to unpredictable throttle behavior.

5. How do you diagnose the P2622 code on a Dodge?

Diagnosis involves scanning for codes, visually inspecting the TPS wiring and connectors, testing the TPS for proper voltage range, and checking the ECM for faults.

6. How do you fix the P2622 code on a Dodge?

Repairs may involve replacing the throttle position sensor, repairing or replacing damaged wiring, or reprogramming or replacing the ECM.

7. What tools are needed to troubleshoot the P2622 code in a Dodge?

Tools include an OBDII scanner, a multimeter for testing voltage, and basic hand tools for inspecting and replacing components.

8. How much does it typically cost to repair the P2622 code in a Dodge?

Costs can vary, but TPS replacement typically ranges from $150 to $300, while ECM repairs can exceed $500 depending on the issue.

9. Can a dirty throttle body cause the P2622 code?

While rare, a dirty throttle body may affect sensor readings and performance, so cleaning it as part of maintenance might help.

10. Does the P2622 code require ECM replacement?

ECM replacement is only necessary if the module is diagnosed as faulty after verifying the TPS and circuit components.

Discuss the causes and fixes for P2622 Dodge OBDII Code

Code P2622 Dodge comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play