AutoCodes – Dodge – P2619 Dodge

P2619 Dodge Code - Crankshaft Position Signal Output Circuit High

Quick Answer

The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2619 Dodge indicates Crankshaft Position Signal Output Circuit High.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,631

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 01, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2619 Dodge Description

The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field causes the voltage from the sensor to change.

OBDII Code P2619 Dodge - Crankshaft Position Signal Output Circuit High - AutoCodes.com — P2619 Dodge Code - Crankshaft Position Signal Output Circuit High

What does this mean?

What are the Possible Causes of the DTC P2619 Dodge?

Faulty Crankshaft Position Sensor
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection

How to Fix the DTC P2619 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2619 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2619 Dodge code?

Need more information on how to fix the P2619 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2619 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2619 Dodge Code

1. What does the OBDII code P2619 mean on a Dodge vehicle?

P2619 indicates a high voltage condition in the crankshaft position signal output circuit, suggesting an issue with the sensor or its associated wiring.

2. What are the common symptoms of the P2619 code in a Dodge?

Symptoms may include difficulty starting the engine, engine stalling, rough idling, poor acceleration, or the Check Engine Light being illuminated.

3. What causes the P2619 code to appear on a Dodge?

Common causes include a faulty crankshaft position sensor, damaged or corroded wiring, a poor electrical connection, or issues with the PCM (powertrain control module).

4. Can I drive my Dodge with the P2619 code?

Driving with this code is not recommended as it can lead to poor engine performance, stalling, or further damage to the engine and related components.

5. How do I diagnose the P2619 code on my Dodge?

Start by inspecting the crankshaft position sensor and its wiring for visible damage or corrosion. Use a multimeter to test the sensor and wiring continuity, and scan the PCM for additional codes.

6. How do I fix the P2619 code on a Dodge vehicle?

Common fixes include replacing the crankshaft position sensor, repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming/replacing the PCM if necessary.

7. How much does it cost to repair the P2619 code on a Dodge?

Repair costs vary but typically range from $100 to $300, depending on whether the crankshaft position sensor or wiring needs repair or replacement.

8. Can a failing battery cause the P2619 code on a Dodge?

A weak or failing battery is unlikely to cause this specific code, but it can exacerbate electrical issues. Ensure the battery and charging system are functioning properly during diagnostics.

9. Will clearing the P2619 code fix the issue on my Dodge?

Clearing the code without addressing the underlying issue will not resolve the problem, and the code is likely to return.

10. Is the P2619 code related to timing problems in a Dodge engine?

While not directly related to engine timing, issues with the crankshaft position sensor can indirectly affect timing signals, leading to performance problems.