AutoCodes – GMC – P2619 2017 GMC Sierra

P2619 2017 GMC Sierra Code - Crankshaft Position Signal Output Circuit High Voltage

Quick Answer

The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2619 2017 GMC Sierra indicates Crankshaft Position Signal Output Circuit High Voltage.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 161

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2619 2017 GMC Sierra Description

The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field causes the voltage from the sensor to change.
The Diagnostic Trouble Code (DTC) will be set when the Crankshaft Position Signal Output Circuit is short to voltage for greater than 5 s.

OBDII Code P2619 2017 GMC Sierra - Crankshaft Position Signal Output Circuit High Voltage - AutoCodes.com — P2619 2017 GMC Sierra Code - Crankshaft Position Signal Output Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P2619 2017 GMC Sierra?

Faulty Crankshaft Position Sensor
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection

How to Fix the DTC P2619 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2619 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2619 2017 GMC Sierra code?

Need more information on how to fix the P2619 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2619 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2619 2017 GMC Sierra Code

1. What are common symptoms of OBDII code P2619 in a 2017 GMC Sierra?

- Common symptoms include engine stalling, rough idling, reduced engine performance, and the illumination of the check engine light.

2. What does the OBDII code P2619 in a 2017 GMC Sierra indicate?

- The code P2619 indicates a high voltage in the crankshaft position signal output circuit of the vehicle.

3. What are the possible causes of OBDII code P2619 in a 2017 GMC Sierra?

- Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors in the circuit, or issues with the engine control module.

4. How can I diagnose the OBDII code P2619 in my 2017 GMC Sierra?

- Diagnosing the code may require using a diagnostic scanner to read the code, testing the crankshaft position sensor, and checking the wiring and connectors for any damage.

5. Can I continue driving my 2017 GMC Sierra with OBDII code P2619?

- It is not recommended to continue driving the vehicle with this code as it can lead to further damage to the engine or other components.

6. How can I repair OBDII code P2619 in my 2017 GMC Sierra?

- Repairing the issue may involve replacing the faulty crankshaft position sensor, repairing damaged wiring or connectors, or reprogramming the engine control module.

7. Are there any DIY tips for troubleshooting OBDII code P2619 in a 2017 GMC Sierra?

- DIY tips include checking the sensor and circuit for visible damage, ensuring proper connection of wiring, and consulting the vehicle's service manual for specific instructions.

8. Is it necessary to reset the OBDII code P2619 after repairing the issue in a 2017 GMC Sierra?

- Yes, it is recommended to reset the code using a diagnostic scanner after repairing the underlying issue to clear the check engine light and ensure proper operation.

9. How much does it cost to fix OBDII code P2619 in a 2017 GMC Sierra at a professional auto repair shop?

- The cost of fixing this code can vary depending on the extent of the issue, but it may range from $100 to $300 for parts and labor.

10. Can OBDII code P2619 in a 2017 GMC Sierra cause any long-term damage if left unrepaired?

- If left unrepaired, the high voltage in the crankshaft position signal output circuit can potentially cause damage to other engine components, leading to more costly repairs in the long run.