P2619 2016 Chevrolet Silverado Code - Crankshaft Position Signal Output Circuit High Voltage
Quick Answer
The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2619 2016 Chevrolet Silverado indicates Crankshaft Position Signal Output Circuit High Voltage.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2619 2016 Chevrolet Silverado Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field causes the voltage from the sensor to change.
The Diagnostic Trouble Code (DTC) will be set when the Crankshaft Position Signal Output Circuit is short to voltage for greater than 5 s.
What are the Possible Causes of the DTC P2619 2016 Chevrolet Silverado?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P2619 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2619 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2619 2016 Chevrolet Silverado code?
Need more information on how to fix the P2619 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2619 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2619 2016 Chevrolet Silverado Code
1. What does code P2619 mean on a 2016 Chevrolet Silverado?
Code P2619 indicates a "Crankshaft Position Signal Output Circuit High Voltage," meaning the signal from the crankshaft position sensor to the engine control module (ECM) has a higher voltage than expected.
2. What are the common symptoms of a P2619 code in a 2016 Chevrolet Silverado?
Common symptoms include engine stalling, rough idling, difficulty starting, reduced fuel efficiency, and the check engine light being illuminated.
3. What causes a P2619 code on a 2016 Chevrolet Silverado?
Potential causes include a faulty crankshaft position sensor, damaged or corroded wiring, a short or open circuit in the sensor's electrical connections, or a malfunctioning ECM.
4. Can I drive my 2016 Chevrolet Silverado with a P2619 code?
Driving with a P2619 code is not recommended, as it can lead to engine performance issues such as stalling or failure to start, which could leave you stranded.
5. How do I diagnose a P2619 code in my 2016 Chevrolet Silverado?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the crankshaft position sensor and its wiring for damage, and testing the electrical circuit for continuity or shorts.
6. How do I fix a P2619 code on my 2016 Chevrolet Silverado?
Repairs may include replacing the crankshaft position sensor, repairing or replacing damaged wiring, clearing corrosion on electrical connectors, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to fix a P2619 code on a 2016 Chevrolet Silverado?
The cost to repair a P2619 code varies but typically ranges from $100 to $300 for a crankshaft position sensor replacement, depending on labor rates and parts.
8. Can a dead battery cause a P2619 code on a 2016 Chevrolet Silverado?
A weak or dead battery is unlikely to directly cause the P2619 code, but low voltage can affect the ECM’s ability to read sensor signals, potentially triggering related issues.
9. Will a P2619 code damage my engine if left unresolved?
While the code itself may not directly damage the engine, prolonged operation with this issue can lead to misfires, poor performance, or further damage to engine components.
10. Can I clear a P2619 code without fixing the issue?
Clearing the code with an OBDII scanner will turn off the check engine light temporarily, but the code will return if the underlying issue is not resolved.
Discuss the causes and fixes for P2619 2016 Chevrolet Silverado OBDII Code
Code P2619 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
