P2619 2015 GMC Sierra Code - Crankshaft Position Signal Output Circuit High Voltage
Quick Answer
The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2619 2015 GMC Sierra indicates Crankshaft Position Signal Output Circuit High Voltage.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2619 2015 GMC Sierra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field causes the voltage from the sensor to change.
The Diagnostic Trouble Code (DTC) will be set when the Crankshaft Position Signal Output Circuit is short to voltage for greater than 5 s.
What are the Possible Causes of the DTC P2619 2015 GMC Sierra?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P2619 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2619 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2619 2015 GMC Sierra code?
Need more information on how to fix the P2619 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2619 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2619 2015 GMC Sierra Code
1. What does the OBDII code P2619 mean on a 2015 GMC Sierra?
The code P2619 indicates a problem with the Crankshaft Position Signal Output Circuit, specifically that the voltage is higher than expected.
2. What are the common symptoms of P2619 in a 2015 GMC Sierra?
Symptoms may include difficulty starting the engine, engine stalling, reduced performance, or the Check Engine Light illuminating.
3. What causes the P2619 code to appear on a 2015 GMC Sierra?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors in the circuit, or issues with the PCM (Powertrain Control Module).
4. Can I drive my 2015 GMC Sierra with a P2619 code?
Driving with a P2619 code is not recommended, as it can lead to further damage or unsafe conditions if the engine stalls unexpectedly.
5. How do I diagnose the P2619 code on a 2015 GMC Sierra?
Diagnosis typically involves using an OBDII scanner to confirm the code, inspecting the crankshaft position sensor and its wiring, and testing the sensor with a multimeter.
6. How do I fix the P2619 code on my 2015 GMC Sierra?
Repairs may include replacing the crankshaft position sensor, repairing damaged wiring or connectors, or reprogramming or replacing the PCM if necessary.
7. How much does it cost to repair the P2619 code on a 2015 GMC Sierra?
The cost varies, but replacing a crankshaft position sensor typically ranges from $150 to $300, including parts and labor.
8. Can a bad battery cause the P2619 code on a 2015 GMC Sierra?
While unlikely, a weak battery or charging system issue can sometimes cause voltage-related codes and should be checked as part of the diagnosis.
9. Will clearing the P2619 code solve the problem on my 2015 GMC Sierra?
Clearing the code without addressing the underlying issue will not fix the problem, and the code is likely to return.
10. Is the P2619 code related to the timing of the engine in a 2015 GMC Sierra?
Yes, the crankshaft position sensor is critical for proper engine timing, and a fault in its circuit can disrupt engine operation.
Discuss the causes and fixes for P2619 2015 GMC Sierra OBDII Code
Code P2619 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
