P2619 2014 GMC Sierra Code - Crankshaft Position Signal Output Circuit High Voltage
Quick Answer
The Crankshaft Position Sensor is also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2619 2014 GMC Sierra indicates Crankshaft Position Signal Output Circuit High Voltage.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2619 2014 GMC Sierra Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field causes the voltage from the sensor to change.
The Diagnostic Trouble Code (DTC) will be set when the Crankshaft Position Signal Output Circuit is short to voltage for greater than 5 s.
What are the Possible Causes of the DTC P2619 2014 GMC Sierra?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P2619 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2619 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2619 2014 GMC Sierra code?
Need more information on how to fix the P2619 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2619 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2619 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code P2619 in a 2014 GMC Sierra?
- Common symptoms include engine stalling, rough idling, poor acceleration, and possibly even the vehicle not starting.
2. What does the OBDII code P2619 for a 2014 GMC Sierra indicate?
- This code indicates a high voltage condition in the crankshaft position signal output circuit.
3. What are the possible causes of OBDII code P2619 in a 2014 GMC Sierra?
- Possible causes include a faulty crankshaft position sensor, wiring issues in the circuit, a malfunctioning engine control module (ECM), or a poor electrical connection.
4. How can I diagnose the cause of OBDII code P2619 in my 2014 GMC Sierra?
- Diagnosing this code typically involves checking the crankshaft position sensor, inspecting the wiring for any damage or corrosion, testing the ECM, and verifying the electrical connections.
5. Can I still drive my 2014 GMC Sierra with OBDII code P2619?
- It is not recommended to drive your vehicle with this code active, as it can lead to further engine damage and potential safety hazards.
6. How do I repair OBDII code P2619 in a 2014 GMC Sierra?
- Repairing this code may involve replacing the crankshaft position sensor, repairing or replacing damaged wiring, addressing ECM issues, and ensuring all electrical connections are secure.
7. Will resetting the OBDII code P2619 in my 2014 GMC Sierra make it go away permanently?
- Simply resetting the code may temporarily clear the warning light, but if the underlying issue is not addressed, the code is likely to return.
8. Can a DIY enthusiast fix OBDII code P2619 in a 2014 GMC Sierra?
- Depending on the individual's mechanical skills and access to tools, some DIY enthusiasts may be able to diagnose and repair this code, but it is recommended to seek professional help if unsure.
9. Is OBDII code P2619 in a 2014 GMC Sierra a common issue?
- While not as common as some other codes, P2619 can still occur in vehicles like the 2014 GMC Sierra due to sensor or wiring issues.
10. How much can I expect to pay to fix OBDII code P2619 in a 2014 GMC Sierra?
- The cost of fixing this code can vary depending on the exact cause and parts needed, but it's advisable to budget for diagnostic fees, parts, and potentially labor costs.
Discuss the causes and fixes for P2619 2014 GMC Sierra OBDII Code
Code P2619 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
