AutoCodes – Cadillac – P260C Cadillac

P260C Cadillac Code - Power Take-Off Relay Control Circuit High Voltage

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P260C Cadillac indicates Power Take-Off Relay Control Circuit High Voltage.
Common causes: Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 326

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P260C Cadillac Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote. The Diagnostic Trouble Code (DTC) will be set when the power take-off control module detects a fault on the PTO relay coil control circuit that is above or below a predetermined voltage threshold.

OBDII Code P260C Cadillac - Power Take-Off Relay Control Circuit High Voltage - AutoCodes.com — P260C Cadillac Code - Power Take-Off Relay Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P260C Cadillac?

Faulty Power Take-Off (PTO) Control Module
Power Take-Off Control Module harness is open or shorted
Power Take-Off Control Module circuit poor electrical connection

How to Fix the DTC P260C Cadillac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P260C Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P260C Cadillac code?

Need more information on how to fix the P260C Cadillac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P260C Cadillac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P260C Cadillac Code

1. What are the common symptoms of OBDII code P260C in a Cadillac?

- Common symptoms include the illumination of the Check Engine Light, reduced engine performance, and potential issues with the power take-off system.

2. What does the OBDII code P260C Cadillac indicate?

- OBDII code P260C indicates a high voltage condition in the power take-off relay control circuit of the Cadillac.

3. What are the possible causes of OBDII code P260C in a Cadillac?

- Possible causes include a faulty power take-off relay, damaged wiring or connectors in the relay control circuit, or issues with the power take-off system components.

4. How can I diagnose the OBDII code P260C in my Cadillac?

- Diagnosing the code involves using a diagnostic scanner to retrieve the code, inspecting the power take-off relay and related components, and testing the circuit for proper voltage.

5. Can I continue driving my Cadillac with the OBDII code P260C present?

- It is not recommended to drive the Cadillac with the code present, as it can lead to further damage to the power take-off system and potentially affect the vehicle's performance.

6. How can I repair OBDII code P260C in my Cadillac?

- Repairing the code may involve replacing the faulty power take-off relay, repairing damaged wiring or connectors, or addressing any issues with the power take-off system components.

7. Is it safe to reset the OBDII code P260C without addressing the underlying issue?

- It is not recommended to simply reset the code without addressing the underlying issue, as it may lead to recurring problems and potential safety hazards.

8. How much does it typically cost to repair OBDII code P260C in a Cadillac?

- The cost of repairing the code can vary depending on the specific issue and required repairs, but it may involve parts and labor costs ranging from $100 to $500 or more.

9. Can a DIY enthusiast fix OBDII code P260C in a Cadillac?

- DIY enthusiasts with automotive repair experience may be able to diagnose and repair the code, but it is recommended to consult a professional mechanic for accurate diagnosis and proper repair procedures.

10. How long does it take to repair OBDII code P260C in a Cadillac?

- The repair time for the code can vary depending on the specific issue and repair process, but it may take anywhere from a few hours to a full day to complete the repairs.