AutoCodes – Buick – P260C Buick

P260C Buick Code - Power Take-Off Relay Control Circuit High Voltage

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P260C Buick indicates Power Take-Off Relay Control Circuit High Voltage.
Common causes: Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 498

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P260C Buick Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote. The Diagnostic Trouble Code (DTC) will be set when the power take-off control module detects a fault on the PTO relay coil control circuit that is above or below a predetermined voltage threshold.

OBDII Code P260C Buick - Power Take-Off Relay Control Circuit High Voltage - AutoCodes.com — P260C Buick Code - Power Take-Off Relay Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P260C Buick?

Faulty Power Take-Off (PTO) Control Module
Power Take-Off Control Module harness is open or shorted
Power Take-Off Control Module circuit poor electrical connection

How to Fix the DTC P260C Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P260C Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P260C Buick code?

Need more information on how to fix the P260C Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P260C Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P260C Buick Code

What does the OBDII code P260C mean for a Buick?

The P260C code indicates a high voltage issue in the Power Take-Off Relay Control Circuit, which may affect auxiliary systems connected through the relay.

What are the common symptoms of code P260C on a Buick?

Symptoms may include the check engine light turning on, erratic operation of auxiliary systems, or a malfunction in power take-off accessories.

What causes the P260C code on a Buick?

Possible causes include a faulty power take-off relay, damaged wiring or connectors in the circuit, or a malfunctioning control module.

How can I diagnose the P260C code on my Buick?

Start by inspecting the wiring and connectors for damage, test the power take-off relay for proper function, and check for voltage abnormalities in the circuit.

Can a faulty relay trigger the P260C code on a Buick?

Yes, a malfunctioning power take-off relay is a common cause of this code and should be tested or replaced as part of the diagnostic process.

Is it safe to drive a Buick with the P260C code?

While the vehicle may still be drivable, ignoring the code could lead to further electrical issues or failures in auxiliary systems. Prompt diagnosis is recommended.

What tools are needed to troubleshoot the P260C code on a Buick?

Youâ€™ll need an OBDII scanner, a multimeter to test voltage and continuity, and basic tools to inspect wiring and connectors.

How much does it cost to repair the P260C code on a Buick?

Repair costs vary depending on the issue. Replacing a relay may cost $50â€“$150, while resolving wiring issues or module replacement could cost more.

Can the P260C code reset on its own on a Buick?

The code typically does not reset on its own. Repairs must be completed, and the code can be cleared using an OBDII scanner.

What happens if the P260C code is ignored?

Ignoring the code can lead to further electrical issues, reduced functionality of power take-off systems, and potential damage to other components in the circuit.