AutoCodes – Chevrolet – P260C 2015 Chevrolet Silverado

P260C 2015 Chevrolet Silverado Code - Power Take-Off Relay Control Circuit High Voltage

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P260C 2015 Chevrolet Silverado indicates Power Take-Off Relay Control Circuit High Voltage.
Common causes: Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 217

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P260C 2015 Chevrolet Silverado Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote. The Diagnostic Trouble Code (DTC) will be set when the power take-off control module detects a fault on the PTO relay coil control circuit that is above or below a predetermined voltage threshold.

OBDII Code P260C 2015 Chevrolet Silverado - Power Take-Off Relay Control Circuit High Voltage - AutoCodes.com — P260C 2015 Chevrolet Silverado Code - Power Take-Off Relay Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P260C 2015 Chevrolet Silverado?

Faulty Power Take-Off (PTO) Control Module
Power Take-Off Control Module harness is open or shorted
Power Take-Off Control Module circuit poor electrical connection

How to Fix the DTC P260C 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P260C 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P260C 2015 Chevrolet Silverado code?

Need more information on how to fix the P260C 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P260C 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P260C 2015 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P260C in a 2015 Chevrolet Silverado?

- Common symptoms include the check engine light being illuminated, reduced engine power, and possible issues with the power take-off system.

2. What can cause OBDII code P260C in a 2015 Chevrolet Silverado?

- The code P260C is typically triggered by a high voltage condition in the power take-off relay control circuit. This can be caused by a faulty relay, wiring issues, or a malfunctioning control module.

3. How serious is OBDII code P260C in a 2015 Chevrolet Silverado?

- While the vehicle may still operate, it is important to address this code promptly to prevent potential damage to the power take-off system and ensure proper vehicle performance.

4. How can I diagnose OBDII code P260C in a 2015 Chevrolet Silverado?

- Diagnosing this code usually involves using a scan tool to retrieve the specific error code and then inspecting the power take-off relay, related wiring, and control module for any visible damage or issues.

5. Can I still drive my 2015 Chevrolet Silverado with OBDII code P260C?

- It is generally not recommended to drive the vehicle with this code present, as it can lead to further damage if left unaddressed. It is best to have the issue diagnosed and repaired as soon as possible.

6. How can I repair OBDII code P260C in a 2015 Chevrolet Silverado?

- Repairing this code may involve replacing the power take-off relay, repairing any damaged wiring, or addressing issues with the control module. It is advisable to consult a professional mechanic for proper diagnosis and repair.

7. Will resetting the check engine light resolve OBDII code P260C in a 2015 Chevrolet Silverado?

- Simply resetting the check engine light will not fix the underlying issue causing the code. The root cause of the high voltage condition in the power take-off relay control circuit needs to be addressed for a proper repair.

8. How much does it cost to fix OBDII code P260C in a 2015 Chevrolet Silverado?

- The cost of repairing this code can vary depending on the specific cause of the issue, the labor rates in your area, and the parts needed for the repair. It is recommended to obtain a few quotes from local mechanics for an accurate estimate.

9. Can extreme weather conditions trigger OBDII code P260C in a 2015 Chevrolet Silverado?

- While extreme weather conditions may not directly cause this code, they can potentially exacerbate existing issues with the power take-off system or related components, leading to the code being triggered.

10. Is OBDII code P260C a common issue in 2015 Chevrolet Silverado vehicles?

- The occurrence of this code may vary, but it is not uncommon in 2015 Chevrolet Silverado trucks, especially in those equipped with power take-off systems. Regular maintenance and prompt diagnosis of any warning lights can help prevent this issue.