AutoCodes – Chevrolet – P260C 2014 Chevrolet Silverado

P260C 2014 Chevrolet Silverado Code - Power Take-Off Relay Control Circuit High Voltage

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P260C 2014 Chevrolet Silverado indicates Power Take-Off Relay Control Circuit High Voltage.
Common causes: Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 191

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P260C 2014 Chevrolet Silverado Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote. The Diagnostic Trouble Code (DTC) will be set when the power take-off control module detects a fault on the PTO relay coil control circuit that is above or below a predetermined voltage threshold.

OBDII Code P260C 2014 Chevrolet Silverado - Power Take-Off Relay Control Circuit High Voltage - AutoCodes.com — P260C 2014 Chevrolet Silverado Code - Power Take-Off Relay Control Circuit High Voltage

What does this mean?

What are the Possible Causes of the DTC P260C 2014 Chevrolet Silverado?

Faulty Power Take-Off (PTO) Control Module
Power Take-Off Control Module harness is open or shorted
Power Take-Off Control Module circuit poor electrical connection

How to Fix the DTC P260C 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P260C 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P260C 2014 Chevrolet Silverado code?

Need more information on how to fix the P260C 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P260C 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P260C 2014 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P260C in a 2014 Chevrolet Silverado?

The common symptoms of code P260C include the Check Engine Light coming on, reduced engine performance, and potential issues with the power take-off system.

2. What causes the Power Take-Off Relay Control Circuit High Voltage code in a 2014 Chevrolet Silverado?

The P260C code is typically triggered by a malfunction in the power take-off relay control circuit, which may be caused by a faulty relay, wiring issues, or a problem with the power take-off system itself.

3. How serious is the P260C fault code in a 2014 Chevrolet Silverado?

While the P260C code may not cause immediate harm to the vehicle, it can lead to reduced performance and potential drivability issues. It is recommended to address this code promptly to prevent further complications.

4. Can I continue driving my 2014 Chevrolet Silverado with the P260C trouble code?

It is not advisable to continue driving the vehicle with an active P260C trouble code, as it can impact the performance and efficiency of the vehicle. It is recommended to have the issue diagnosed and repaired as soon as possible.

5. How can I diagnose the Power Take-Off Relay Control Circuit High Voltage code in my 2014 Chevrolet Silverado?

Diagnosing the P260C code involves using an OBDII scanner to retrieve the specific fault code, inspecting the power take-off relay and related wiring, and testing the power take-off system for proper functionality.

6. What are the repair options for fixing the P260C code in a 2014 Chevrolet Silverado?

Repairing the P260C code may involve replacing the faulty power take-off relay, repairing any damaged wiring, or addressing issues with the power take-off system itself. It is recommended to consult a professional mechanic for an accurate diagnosis and repair.

7. Can I reset the P260C trouble code in my 2014 Chevrolet Silverado by disconnecting the battery?

While disconnecting the battery may clear the trouble code temporarily, it is not a permanent solution. The underlying issue causing the P260C code needs to be identified and repaired to prevent the code from reoccurring.

8. Will a P260C trouble code affect the fuel efficiency of my 2014 Chevrolet Silverado?

The P260C code may lead to reduced fuel efficiency due to potential drivability issues and compromised engine performance. Addressing the code promptly can help maintain optimal fuel efficiency.

9. Is the Power Take-Off Relay Control Circuit High Voltage code a common issue in 2014 Chevrolet Silverado trucks?

While the P260C code may not be as common as other OBDII codes, it can still occur in 2014 Chevrolet Silverado trucks, particularly in vehicles with power take-off systems. Regular maintenance and inspections can help prevent such issues.

10. Can a DIY enthusiast successfully diagnose and repair the P260C code in a 2014 Chevrolet Silverado?

While some DIY enthusiasts may have the skills to diagnose and repair the P260C code, it is recommended to seek professional assistance for an accurate diagnosis and proper repair. Working with a qualified mechanic can ensure the issue is resolved correctly.