AutoCodes – GMC – P260B 2015 GMC Sierra

P260B 2015 GMC Sierra Code - Power Take-Off Relay Control Circuit Low Voltage

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P260B 2015 GMC Sierra indicates Power Take-Off Relay Control Circuit Low Voltage.
Common causes: Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 190

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P260B 2015 GMC Sierra Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote. The Diagnostic Trouble Code (DTC) will be set when the power take-off control module detects a fault on the PTO relay coil control circuit that is above or below a predetermined voltage threshold.

OBDII Code P260B 2015 GMC Sierra - Power Take-Off Relay Control Circuit Low Voltage - AutoCodes.com — P260B 2015 GMC Sierra Code - Power Take-Off Relay Control Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P260B 2015 GMC Sierra?

Faulty Power Take-Off (PTO) Control Module
Power Take-Off Control Module harness is open or shorted
Power Take-Off Control Module circuit poor electrical connection

How to Fix the DTC P260B 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P260B 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P260B 2015 GMC Sierra code?

Need more information on how to fix the P260B 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P260B 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P260B 2015 GMC Sierra Code

1. What are the common symptoms of OBDII code P260B in a 2015 GMC Sierra?

The common symptoms of code P260B include a check engine light, reduced engine performance, and potential issues with the power take-off system.

2. What does the OBDII code P260B in a 2015 GMC Sierra indicate?

Code P260B indicates a low voltage condition in the power take-off (PTO) relay control circuit of the vehicle.

3. What are the possible causes of OBDII code P260B in a 2015 GMC Sierra?

Possible causes of code P260B include a faulty power take-off relay, damaged wiring or connectors in the circuit, or a malfunctioning power take-off system.

4. How can I diagnose the OBDII code P260B in my 2015 GMC Sierra?

Diagnosing code P260B involves using a scan tool to retrieve the code, inspecting the power take-off relay and associated wiring, and performing voltage tests to pinpoint the issue.

5. Can I still drive my 2015 GMC Sierra with OBDII code P260B present?

It is not recommended to drive your vehicle with code P260B active, as it can lead to further damage to the power take-off system and potentially affect the overall drivability of the vehicle.

6. How can I repair OBDII code P260B in my 2015 GMC Sierra?

Repairing code P260B may involve replacing the power take-off relay, repairing damaged wiring or connectors, or addressing any underlying issues with the power take-off system.

7. Is it safe to reset the OBDII code P260B in my 2015 GMC Sierra without fixing the underlying issue?

Resetting the code without fixing the underlying issue may temporarily turn off the check engine light, but the problem will likely reoccur, potentially causing more severe issues in the long run.

8. Can a DIY enthusiast fix OBDII code P260B in a 2015 GMC Sierra?

While some basic troubleshooting like checking for loose connections or damaged wiring can be done by a DIY enthusiast, diagnosing and repairing complex issues related to code P260B may require professional expertise.

9. How much does it cost to repair OBDII code P260B in a 2015 GMC Sierra?

The cost of repairing code P260B can vary depending on the underlying issue, the extent of the repairs needed, and whether you choose to do the repairs yourself or seek assistance from a mechanic.

10. How often does OBDII code P260B occur in 2015 GMC Sierra vehicles?

Code P260B related to the power take-off relay control circuit low voltage issue may occur sporadically in 2015 GMC Sierra vehicles, especially if there are issues with the power take-off system or related components.