AutoCodes – Chevrolet – P260A 2017 Chevrolet Silverado

P260A 2017 Chevrolet Silverado Code - Power Take-Off Relay Control Circuit

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P260A 2017 Chevrolet Silverado indicates Power Take-Off Relay Control Circuit.
Common causes: Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 185

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P260A 2017 Chevrolet Silverado Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote. The Diagnostic Trouble Code (DTC) will be set when the power take-off control module detects a fault on the PTO relay coil control circuit that is above or below a predetermined voltage threshold.

OBDII Code P260A 2017 Chevrolet Silverado - Power Take-Off Relay Control Circuit - AutoCodes.com — P260A 2017 Chevrolet Silverado Code - Power Take-Off Relay Control Circuit

What does this mean?

What are the Possible Causes of the DTC P260A 2017 Chevrolet Silverado?

Faulty Power Take-Off (PTO) Control Module
Power Take-Off Control Module harness is open or shorted
Power Take-Off Control Module circuit poor electrical connection

How to Fix the DTC P260A 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P260A 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P260A 2017 Chevrolet Silverado code?

Need more information on how to fix the P260A 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P260A 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P260A 2017 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P260A in a 2017 Chevrolet Silverado?

- The common symptoms include the check engine light illuminating on the dashboard and potential issues with the power take-off system.

2. What does the OBDII code P260A for a 2017 Chevrolet Silverado indicate?

- This code signifies a problem with the power take-off relay control circuit in the vehicle.

3. What are the possible causes of OBDII code P260A in a 2017 Chevrolet Silverado?

- The code can be triggered by issues such as a faulty power take-off relay, damaged wiring, or a malfunctioning power take-off control module.

4. How can I diagnose the OBDII code P260A in my 2017 Chevrolet Silverado?

- Diagnosis typically involves using an OBDII scanner to retrieve the fault code and then inspecting the power take-off relay, wiring, and control module for any visible damage.

5. What are some tips for repairing OBDII code P260A in a 2017 Chevrolet Silverado?

- Repairing this code may involve replacing the faulty power take-off relay, repairing damaged wiring, or replacing the malfunctioning power take-off control module.

6. Can driving with OBDII code P260A in a 2017 Chevrolet Silverado cause further damage?

- Continuing to drive with this code may lead to issues with the power take-off system, reduced vehicle performance, and potential damage to other components.

7. Is it safe to continue driving my 2017 Chevrolet Silverado with the power take-off relay control circuit issue?

- It is not recommended to drive the vehicle with this issue as it can impact the proper functioning of the power take-off system and potentially lead to further complications.

8. How much does it typically cost to repair OBDII code P260A in a 2017 Chevrolet Silverado?

- The repair costs can vary depending on the exact cause of the issue, but it is advisable to consult a professional mechanic for an accurate diagnosis and cost estimate.

9. Can I reset the OBDII code P260A in my 2017 Chevrolet Silverado myself?

- While you can clear the fault code with an OBDII scanner, it is crucial to address the underlying issue causing the code to prevent it from reoccurring.

10. Does the OBDII code P260A in a 2017 Chevrolet Silverado affect vehicle safety?

- While the code itself may not directly impact safety, it is essential to address any underlying issues promptly to ensure the vehicle operates smoothly and reliably.