AutoCodes – Chevrolet – P260A 2014 Chevrolet Silverado

P260A 2014 Chevrolet Silverado Code - Power Take-Off Relay Control Circuit

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P260A 2014 Chevrolet Silverado indicates Power Take-Off Relay Control Circuit.
Common causes: Common causes include Faulty Power Take-Off (PTO) Control Module, Power Take-Off Control Module harness is open or shorted, Power Take-Off Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 224

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P260A 2014 Chevrolet Silverado Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote. The Diagnostic Trouble Code (DTC) will be set when the power take-off control module detects a fault on the PTO relay coil control circuit that is above or below a predetermined voltage threshold.

OBDII Code P260A 2014 Chevrolet Silverado - Power Take-Off Relay Control Circuit - AutoCodes.com — P260A 2014 Chevrolet Silverado Code - Power Take-Off Relay Control Circuit

What does this mean?

What are the Possible Causes of the DTC P260A 2014 Chevrolet Silverado?

Faulty Power Take-Off (PTO) Control Module
Power Take-Off Control Module harness is open or shorted
Power Take-Off Control Module circuit poor electrical connection

How to Fix the DTC P260A 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P260A 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P260A 2014 Chevrolet Silverado code?

Need more information on how to fix the P260A 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P260A 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P260A 2014 Chevrolet Silverado Code

1. What does the OBDII code P260A for a 2014 Chevrolet Silverado indicate?

The P260A code in a 2014 Chevrolet Silverado refers to a malfunction in the Power Take-Off (PTO) Relay Control Circuit.

2. What are the common symptoms of the P260A code in a 2014 Chevrolet Silverado?

Common symptoms of the P260A code may include the inability to engage the power take-off unit, illumination of the Check Engine Light, and potential drivability issues.

3. What are the possible causes of the P260A code in a 2014 Chevrolet Silverado?

Potential causes of the P260A code include a faulty power take-off relay, damaged wiring or connectors in the relay control circuit, or a malfunction in the power take-off unit itself.

4. How can I diagnose the P260A code in my 2014 Chevrolet Silverado?

Diagnosing the P260A code typically involves using an OBDII scanner to retrieve the code, inspecting the power take-off relay and related wiring for any visible damage, and conducting continuity tests to pinpoint the issue.

5. Can I still drive my 2014 Chevrolet Silverado with the P260A code present?

It is not recommended to drive your vehicle with the P260A code active, as it may lead to further damage or safety concerns related to the power take-off system.

6. How can I repair the P260A code in my 2014 Chevrolet Silverado?

Repairing the P260A code may involve replacing the faulty power take-off relay, repairing damaged wiring or connectors, or addressing any issues with the power take-off unit itself.

7. Is it necessary to reset the OBDII code after repairing the P260A issue in a 2014 Chevrolet Silverado?

Yes, it is important to clear the OBDII code after fixing the underlying problem to reset the Check Engine Light and ensure proper functioning of the power take-off system.

8. Can a DIY enthusiast fix the P260A code issue in a 2014 Chevrolet Silverado?

While some simple checks like inspecting wiring connections can be done by a DIY enthusiast, resolving complex issues related to the power take-off system may require professional expertise.

9. How much can I expect to pay for repairing the P260A code in my 2014 Chevrolet Silverado?

The cost of repairing the P260A code in a 2014 Chevrolet Silverado can vary depending on the extent of the issue, parts needed, and labor rates, so it's advisable to get estimates from reputable mechanics.

10. Are there any preventative maintenance tips to avoid the recurrence of the P260A code in a 2014 Chevrolet Silverado?

To prevent the P260A code from reoccurring, it's essential to perform regular inspections of the power take-off system, address any electrical issues promptly, and follow the manufacturer's maintenance schedule.