P25C9 2015 GMC Sierra Code - Brake System Control Module 2 Requested MIL Illumination
Quick Answer
Control modules constantly monitor the vehicle for any condition which may adversely affect vehicle performance. Common causes include Check Brake System Control Module for codes, Faulty Brake System Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P25C9 2015 GMC Sierra indicates Brake System Control Module 2 Requested MIL Illumination.
- Common causes
- Common causes include Check Brake System Control Module for codes, Faulty Brake System Control Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P25C9 2015 GMC Sierra Description
The DTC will be set when the ECM receives a serial data message from the Brake System Control Module indicating that DTC has been set in the module.
What are the Possible Causes of the DTC P25C9 2015 GMC Sierra?
- Check Brake System Control Module for codes
- Faulty Brake System Control Module
How to Fix the DTC P25C9 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P25C9 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P25C9 2015 GMC Sierra code?
Need more information on how to fix the P25C9 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P25C9 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P25C9 2015 GMC Sierra Code
1. What are the common symptoms of OBDII code P25C9 in a 2015 GMC Sierra?
- Common symptoms include the illumination of the malfunction indicator lamp (MIL) or check engine light on the dashboard.
2. What does the OBDII code P25C9 indicate in a 2015 GMC Sierra?
- The P25C9 code specifically refers to an issue with the Brake System Control Module 2 requesting the MIL (malfunction indicator lamp) to illuminate.
3. What are the possible causes of OBDII code P25C9 in a 2015 GMC Sierra?
- Possible causes include a faulty brake system control module, wiring or connection issues, software glitches, or a malfunction in the vehicle's electronic systems.
4. How serious is the OBDII code P25C9 in a 2015 GMC Sierra?
- While the vehicle may still be drivable with this code, it is important to address the underlying issue promptly to ensure the proper functioning of the brake system and other related systems.
5. Can I continue to drive my 2015 GMC Sierra with the P25C9 code present?
- It is recommended to have the vehicle inspected and repaired as soon as possible to prevent potential safety hazards and further damage to the vehicle.
6. How can I diagnose and repair the OBDII code P25C9 in my 2015 GMC Sierra?
- Diagnosis typically involves using a diagnostic scanner to retrieve the specific code and then inspecting the brake system control module, wiring, and connections for any issues. Repair may involve replacing the faulty components or addressing any wiring/connection problems.
7. Is it possible to reset the OBDII code P25C9 in a 2015 GMC Sierra without repairing the issue?
- While clearing the code using a diagnostic scanner may temporarily turn off the MIL, the underlying problem will persist, and the code is likely to return until the root cause is properly addressed.
8. Can a DIY enthusiast fix the OBDII code P25C9 in a 2015 GMC Sierra?
- While some may attempt to diagnose and repair this code themselves, it is recommended to consult with a professional mechanic or technician due to the complexity of the brake system and electronic components involved.
9. Will the OBDII code P25C9 cause my 2015 GMC Sierra to fail an emissions test?
- Depending on local regulations, the presence of an illuminated MIL due to the P25C9 code may cause the vehicle to fail an emissions test, as it indicates a potential issue with the vehicle's emission control system.
10. How much can I expect to pay to repair the OBDII code P25C9 in a 2015 GMC Sierra?
- Repair costs can vary depending on the exact cause of the issue, the labor rates in your area, and whether any parts need to be replaced. It is advisable to get a diagnostic and repair estimate from a qualified mechanic.
Discuss the causes and fixes for P25C9 2015 GMC Sierra OBDII Code
Code P25C9 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
