AutoCodes – Chevrolet – P258E 2017 Chevrolet Silverado

P258E 2017 Chevrolet Silverado Code - Power Take-Off Enable Switch Performance

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take Off (PTO) Enable Switch, Power Take Off Enable Switch harness is open or shorted, Power Take Off Enable Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P258E 2017 Chevrolet Silverado indicates Power Take-Off Enable Switch Performance.
Common causes: Common causes include Faulty Power Take Off (PTO) Enable Switch, Power Take Off Enable Switch harness is open or shorted, Power Take Off Enable Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 202

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P258E 2017 Chevrolet Silverado Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote.
The Diagnostic Trouble Code (DTC) will be set when the Power Take-Off Control Module detects a fault on the PTO enable switch circuit that is above or below a predetermined voltage threshold.

OBDII Code P258E 2017 Chevrolet Silverado - Power Take-Off Enable Switch Performance - AutoCodes.com — P258E 2017 Chevrolet Silverado Code - Power Take-Off Enable Switch Performance

What does this mean?

What are the Possible Causes of the DTC P258E 2017 Chevrolet Silverado?

Faulty Power Take Off (PTO) Enable Switch
Power Take Off Enable Switch harness is open or shorted
Power Take Off Enable Switch circuit poor electrical connection
Faulty Power Take-Off Control Module

How to Fix the DTC P258E 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P258E 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P258E 2017 Chevrolet Silverado code?

Need more information on how to fix the P258E 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P258E 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P258E 2017 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P258E in a 2017 Chevrolet Silverado?

- Common symptoms include the power take-off system not engaging or disengaging properly, reduced power output, and potentially the vehicle going into a limp mode.

2. What does the OBDII code P258E indicate in a 2017 Chevrolet Silverado?

- The code P258E indicates a performance issue with the Power Take-Off Enable Switch in a 2017 Chevrolet Silverado.

3. What are the possible causes of OBDII code P258E in a 2017 Chevrolet Silverado?

- Possible causes include a faulty Power Take-Off Enable Switch, wiring issues, a defective power take-off control module, or software-related issues.

4. How can I diagnose the OBDII code P258E in my 2017 Chevrolet Silverado?

- Diagnosis involves using a diagnostic scanner to retrieve the fault code, inspecting the Power Take-Off Enable Switch and related wiring, and testing the power take-off system for proper functionality.

5. Can I continue driving my 2017 Chevrolet Silverado with OBDII code P258E?

- It is not recommended to drive the vehicle with this code present, as it can lead to further damage to the power take-off system and potentially affect the vehicle's performance.

6. How can I repair OBDII code P258E in my 2017 Chevrolet Silverado?

- Repair options may include replacing the Power Take-Off Enable Switch, repairing any damaged wiring, reprogramming the power take-off control module, or addressing any other identified issues causing the code.

7. Is it safe to reset the OBDII code P258E in my 2017 Chevrolet Silverado using a scanner?

- While resetting the code may temporarily clear the fault, it is crucial to diagnose and address the underlying issue causing the code to prevent it from reoccurring.

8. Can a DIY enthusiast fix OBDII code P258E in a 2017 Chevrolet Silverado?

- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to address simpler causes of the code, such as checking and cleaning the Power Take-Off Enable Switch connections.

9. How much does it typically cost to repair OBDII code P258E in a 2017 Chevrolet Silverado?

- Repair costs can vary depending on the exact cause of the code, but expenses may include parts such as a new Power Take-Off Enable Switch and labor for diagnosis and repair.

10. How often does OBDII code P258E occur in 2017 Chevrolet Silverado vehicles?

- The occurrence of code P258E can vary, but it is not an uncommon issue in 2017 Chevrolet Silverado trucks with a power take-off system.