AutoCodes – Chevrolet – P258E 2015 Chevrolet Silverado

P258E 2015 Chevrolet Silverado Code - Power Take-Off Enable Switch Performance

Quick Answer

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. Common causes include Faulty Power Take Off (PTO) Enable Switch, Power Take Off Enable Switch harness is open or shorted, Power Take Off Enable Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P258E 2015 Chevrolet Silverado indicates Power Take-Off Enable Switch Performance.
Common causes: Common causes include Faulty Power Take Off (PTO) Enable Switch, Power Take Off Enable Switch harness is open or shorted, Power Take Off Enable Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 182

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P258E 2015 Chevrolet Silverado Description

The Power Take-Off (PTO) is an upfitter integrated system that allows the user to create an auxiliary power source. The PTO system specifically controls engine speed to values higher than normal base idle, PTO load relay engagement, and remote starting and shutdown of the engine. When the operator requests PTO using either the PTO switch or PTO remote, the engine RPM will increase to a default standby speed. The Engine Control Module (ECM) converts the data from the engine speed sensor to a 2 pulses/engine revolution signal. When PTO is engaged, the power take-off control module sends a serial data message to the ECM requesting engine speeds, in response to signals from the PTO switch or remote.
The Diagnostic Trouble Code (DTC) will be set when the Power Take-Off Control Module detects a fault on the PTO enable switch circuit that is above or below a predetermined voltage threshold.

OBDII Code P258E 2015 Chevrolet Silverado - Power Take-Off Enable Switch Performance - AutoCodes.com — P258E 2015 Chevrolet Silverado Code - Power Take-Off Enable Switch Performance

What does this mean?

What are the Possible Causes of the DTC P258E 2015 Chevrolet Silverado?

Faulty Power Take Off (PTO) Enable Switch
Power Take Off Enable Switch harness is open or shorted
Power Take Off Enable Switch circuit poor electrical connection
Faulty Power Take-Off Control Module

How to Fix the DTC P258E 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P258E 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P258E 2015 Chevrolet Silverado code?

Need more information on how to fix the P258E 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P258E 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P258E 2015 Chevrolet Silverado Code

1. What does the OBDII code P258E mean on a 2015 Chevrolet Silverado?

The code P258E indicates an issue with the Power Take-Off (PTO) Enable Switch Performance, typically related to its functionality or electrical circuit.

2. What are the common symptoms of code P258E in a 2015 Chevrolet Silverado?

Symptoms may include the PTO system not engaging, a dashboard warning light, or reduced functionality of equipment relying on the PTO.

3. What causes the P258E code to appear?

Common causes include a faulty PTO enable switch, damaged wiring or connectors, or a malfunctioning PTO control module.

4. How can I diagnose the P258E code on my Silverado?

Start by using an OBDII scanner to confirm the code, then inspect the PTO enable switch, wiring, and connectors for damage or loose connections.

5. Can I still drive my 2015 Silverado with the P258E code?

Yes, the truck is usually drivable, but the PTO system may not function properly, which could impact equipment that relies on it.

6. How do I fix the P258E code on a 2015 Chevrolet Silverado?

Repairs may involve replacing the PTO enable switch, repairing damaged wiring, or reprogramming the PTO control module if needed.

7. How much does it cost to fix the P258E code on a 2015 Silverado?

Repair costs can range from $100 to $400, depending on whether the issue is with the switch, wiring, or control module.

8. Can a dead battery cause the P258E code on a 2015 Silverado?

A dead or weak battery can sometimes cause electrical issues, but it's not a common cause for this specific code.

9. Does the P258E code require professional repair?

While some experienced DIYers can handle this repair, it's recommended to seek professional help if you're unfamiliar with PTO systems or electrical diagnostics.

10. Can clearing the code fix the P258E issue on my Silverado?

Clearing the code may temporarily remove the warning, but if the underlying issue isnâ€™t resolved, the code will likely return.