P2549 GMC Code - Torque Management Request Input Signal 'B' Range/Performance
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2549 GMC indicates Torque Management Request Input Signal 'B' Range/Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2549 GMC Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2549 GMC?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2549 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2549 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2549 GMC code?
Need more information on how to fix the P2549 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2549 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2549 GMC Code
1. What are the common symptoms of OBDII code P2549 in a GMC vehicle?
- Common symptoms include engine stalling, rough idling, decreased acceleration, and potential issues with the transmission shifting.
2. What causes the Torque Management Request Input Signal 'B' Range/Performance error code in a GMC vehicle?
- Possible causes include a faulty torque management request input sensor, wiring issues, a malfunctioning engine control module (ECM), or a software glitch.
3. How can I diagnose OBDII code P2549 in my GMC vehicle?
- To diagnose the issue, you may need to use a scan tool to retrieve the trouble codes, inspect the wiring and connectors related to the torque management sensor, and perform a thorough inspection of the sensor itself.
4. Can I continue driving my GMC with the P2549 error code?
- It is not recommended to continue driving with this error code, as it can lead to further damage to the vehicle and potentially compromise safety.
5. How do I repair the Torque Management Request Input Signal 'B' Range/Performance issue in my GMC?
- Repair options may include replacing the torque management request input sensor, repairing any damaged wiring, or reprogramming the engine control module (ECM) if necessary.
6. Will resetting the error codes make the P2549 code disappear permanently?
- Resetting the error codes may temporarily clear the code, but if the underlying issue causing the P2549 code is not addressed, it is likely to reappear.
7. Is the P2549 error code specific to GMC vehicles only?
- The P2549 error code related to Torque Management Request Input Signal 'B' Range/Performance can be found in various vehicle makes and models, not limited to GMC vehicles.
8. Can a DIY enthusiast fix the P2549 error code issue in a GMC?
- Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to diagnose and repair the P2549 error code, but professional assistance is recommended for more complex issues.
9. How much does it typically cost to repair the P2549 error code in a GMC vehicle?
- Repair costs can vary depending on the root cause of the issue, but expenses may include parts, labor, and diagnostic fees, with an estimated range of $100 to $500 or more.
10. Will ignoring the P2549 error code affect my GMC's overall performance?
- Ignoring the P2549 error code can lead to decreased performance, potential drivability issues, and increased fuel consumption, so it is advisable to address the problem promptly.
Discuss the causes and fixes for P2549 GMC OBDII Code
Code P2549 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
