P2549 Buick Code - Torque Management Request Input Signal 'B' Range/Performance
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2549 Buick indicates Torque Management Request Input Signal 'B' Range/Performance.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2549 Buick Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2549 Buick?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2549 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2549 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2549 Buick code?
Need more information on how to fix the P2549 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2549 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2549 Buick Code
What does OBDII code P2549 mean for a Buick?
OBDII code P2549 indicates an issue with the Torque Management Request Input Signal 'B,' suggesting it is out of range or performing incorrectly.
What are the common symptoms of code P2549 in a Buick?
Symptoms may include reduced engine power, poor acceleration, transmission shifting issues, or the illumination of the check engine light.
What causes the P2549 code to appear in a Buick?
Common causes include a faulty torque management sensor, damaged wiring or connectors, a malfunctioning PCM, or issues within the transmission system.
Can a P2549 code affect my vehicle’s drivability?
Yes, it can lead to reduced engine performance, erratic transmission behavior, and compromised acceleration.
How is code P2549 diagnosed in a Buick?
Mechanics typically use an OBDII scanner, inspect wiring and connectors, test the torque management sensor, and evaluate the PCM and transmission system for malfunctions.
How can I fix the P2549 code on my Buick?
Repairs may include replacing the torque management sensor, repairing damaged wiring or connectors, reprogramming or replacing the PCM, or addressing transmission issues.
Is it safe to drive my Buick with a P2549 code?
Driving with this code is not recommended, as it can affect engine and transmission performance and potentially worsen the underlying issue.
How much does it cost to repair code P2549 in a Buick?
Repair costs vary but may range from $100 to $700 depending on the severity of the issue and whether parts like sensors or the PCM need replacement.
Can a software update resolve the P2549 code on a Buick?
In some cases, a PCM software update may resolve the issue if it’s related to programming errors or compatibility problems.
Will clearing the P2549 code fix the problem?
Clearing the code may temporarily remove the error, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P2549 Buick OBDII Code
Code P2549 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
