P2547 Buick Code - Torque Management Request Input Signal 'A' High
Quick Answer
To improve shift feel, the Transmission Control Module (TCM) may request that the Engine Control Module (ECM) reduce engine torque during shift events. Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2547 Buick indicates Torque Management Request Input Signal 'A' High.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty Transmission Control Module (TCM), Engine Control Module (ECM) software update.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2547 Buick Description
The torque reduction request is sent to the ECM through a communication network called the controller area network (CAN). Two circuits are used to communicate CAN data between the ECM and TCM.
A fault in the CAN will not cause the ECM to set the Diagnostic Trouble Codes (DTC). If a CAN fault occurs, other DTCs will set before this code.
The ECM set the OBDII code when the TCM receives a torque reduction failure message from the ECM.
What are the Possible Causes of the DTC P2547 Buick?
- Faulty Engine Control Module (ECM)
- Faulty Transmission Control Module (TCM)
- Engine Control Module (ECM) software update
- Transmission Control Module (TCM) software update
- Engine Control Module (ECM) harness is open or shorted
- Engine Control Module (ECM) circuit poor electrical connection
How to Fix the DTC P2547 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2547 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2547 Buick code?
Need more information on how to fix the P2547 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2547 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2547 Buick Code
1. What are the common symptoms of OBDII code P2547 in a Buick related to Torque Management Request Input Signal 'A' High?
- Common symptoms include engine stalling, reduced engine power, and the transmission slipping or shifting erratically.
2. What are the possible causes of OBDII code P2547 in a Buick indicating Torque Management Request Input Signal 'A' High?
- Potential causes can include a faulty torque management sensor, wiring issues, a defective PCM (Powertrain Control Module), or a malfunctioning transmission control module.
3. How do I diagnose the OBDII code P2547 in my Buick for Torque Management Request Input Signal 'A' High?
- Diagnosis involves using a scan tool to retrieve the code, checking the wiring and connectors related to the torque management sensor, and testing the sensor's functionality.
4. Can I continue driving my Buick with OBDII code P2547 related to Torque Management Request Input Signal 'A' High?
- It is not recommended to drive the vehicle with this code present, as it can lead to further damage and safety hazards. It is best to address the issue promptly.
5. What are some repair tips for fixing OBDII code P2547 in a Buick associated with Torque Management Request Input Signal 'A' High?
- Repair tips may include replacing the torque management sensor, repairing any damaged wiring, resetting the PCM, or reprogramming the transmission control module.
6. Is it possible to reset OBDII code P2547 in a Buick linked to Torque Management Request Input Signal 'A' High without fixing the underlying issue?
- While clearing the code may temporarily turn off the check engine light, the underlying issue causing the code will persist and may lead to further problems if left unresolved.
7. How much does it typically cost to repair OBDII code P2547 in a Buick due to Torque Management Request Input Signal 'A' High?
- The cost of repair can vary depending on the cause of the issue, but it may range from $100 to $500 or more, including parts and labor.
8. Are there any recalls or technical service bulletins related to OBDII code P2547 in Buick vehicles for Torque Management Request Input Signal 'A' High?
- It is recommended to check with the manufacturer or a certified Buick dealership to inquire about any recalls or technical service bulletins related to this specific OBDII code.
9. Can a DIY enthusiast with automotive repair experience fix OBDII code P2547 in a Buick associated with Torque Management Request Input Signal 'A' High?
- Depending on the cause of the issue, a DIY enthusiast with the necessary tools and experience may be able to diagnose and repair the problem. However, complex issues may require professional assistance.
10. How long does it typically take to repair OBDII code P2547 in a Buick related to Torque Management Request Input Signal 'A' High?
- The repair time can vary based on the specific cause of the code and the complexity of the repair process. It may take anywhere from a few hours to a full day to complete the repair.
Discuss the causes and fixes for P2547 Buick OBDII Code
Code P2547 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
