P2536 2018 GMC Sierra Code - Ignition Accessory Switch Circuit
Quick Answer
The control module continuously monitors the voltage on the Ignition Accessory/Run circuit from the Body Control Module (BCM). Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2536 2018 GMC Sierra indicates Ignition Accessory Switch Circuit.
- Common causes
- Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2536 2018 GMC Sierra Description
What are the Possible Causes of the DTC P2536 2018 GMC Sierra?
- Faulty Body Control Module (BCM)
- Body Control Module harness is open or shorted
- Body Control Module circuit poor electrical connection
How to Fix the DTC P2536 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2536 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2536 2018 GMC Sierra code?
Need more information on how to fix the P2536 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2536 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2536 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P2536 in a 2018 GMC Sierra?
- Common symptoms include the inability to start the vehicle, loss of power accessories, and potential illumination of the check engine light.
2. What does the OBDII code P2536 for Ignition Accessory Switch Circuit mean in a 2018 GMC Sierra?
- This code indicates a problem with the circuit that controls the ignition accessory switch, which can affect the operation of key components in the vehicle.
3. What are the possible causes of OBDII code P2536 in a 2018 GMC Sierra?
- Potential causes include a faulty ignition switch, wiring issues, a defective ignition relay, or a malfunctioning accessory control module.
4. How can I diagnose the OBDII code P2536 in my 2018 GMC Sierra?
- Diagnosis typically involves checking the ignition switch, inspecting the wiring for damage, testing the relay, and scanning the accessory control module for faults.
5. Can I still drive my 2018 GMC Sierra with OBDII code P2536 present?
- It is not recommended to drive the vehicle with this code active, as it can lead to potential issues with starting the vehicle or operating essential accessories.
6. How serious is OBDII code P2536 in a 2018 GMC Sierra?
- While the severity can vary, this code should be addressed promptly to prevent further electrical problems and ensure the proper functioning of the vehicle.
7. How much does it typically cost to repair OBDII code P2536 in a 2018 GMC Sierra?
- Repair costs can vary depending on the specific issue causing the code, but they may range from $100 to $500 for parts and labor.
8. Can I reset the OBDII code P2536 in my 2018 GMC Sierra myself?
- You can attempt to reset the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes, but it's important to address the underlying issue.
9. Is OBDII code P2536 a common problem in 2018 GMC Sierra trucks?
- While not as common as some other OBDII codes, issues with the ignition accessory switch circuit can occur in GMC Sierra trucks, especially with higher mileage.
10. Are there any preventative measures I can take to avoid OBDII code P2536 in my 2018 GMC Sierra?
- Regularly checking and maintaining the ignition system, wiring, and related components can help prevent issues that may trigger this code.
Discuss the causes and fixes for P2536 2018 GMC Sierra OBDII Code
Code P2536 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
