AutoCodes – GMC – P250A 2016 GMC Sierra

P250A 2016 GMC Sierra Code - Engine Oil Level Switch Circuit

Quick Answer

The engine oil level sensor/switch is normally closed with a proper engine oil level. Common causes include Faulty Engine Oil Level Switch, Engine Oil Level Switch harness is open or shorted, Engine Oil Level Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P250A 2016 GMC Sierra indicates Engine Oil Level Switch Circuit.
Common causes: Common causes include Faulty Engine Oil Level Switch, Engine Oil Level Switch harness is open or shorted, Engine Oil Level Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 155

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 21, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P250A 2016 GMC Sierra Description

The engine oil level sensor/switch is normally closed with a proper engine oil level. The switch opens when the engine oil level drops below a calibrated level. The Engine Control Module (ECM) monitors the engine oil level signal circuit when the ignition is ON, and the engine is OFF. With the switch in the closed position, the ECM detects a low voltage on the signal circuit. With the switch in the open position, the ECM detects a high voltage on the signal circuit. When high voltage is detected on the signal circuit, the ECM will send a serial data message to the Instrument Panel Cluster (IPC). The IPC will then display a message on the Driver Information Center (DIC) or illuminate a low engine oil level lamp.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects a high voltage on the signal circuit for three consecutive ignition cycles, followed by an ignition OFF event from 15 minutes to greater than 50 minutes, depending on engine oil temperatures.

OBDII Code P250A 2016 GMC Sierra - Engine Oil Level Switch Circuit - AutoCodes.com — P250A 2016 GMC Sierra Code - Engine Oil Level Switch Circuit

What does this mean?

What are the Possible Causes of the DTC P250A 2016 GMC Sierra?

Faulty Engine Oil Level Switch
Engine Oil Level Switch harness is open or shorted
Engine Oil Level Switch circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P250A 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Low Engine Oil Level Message Lamp (With Diesel Engine) or Engine Oil Level Switch (With Gasoline Engine)

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P250A 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P250A 2016 GMC Sierra code?

Need more information on how to fix the P250A 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P250A 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P250A 2016 GMC Sierra Code

1. What does OBDII code P250A for a 2016 GMC Sierra indicate?

- This code indicates a problem with the Engine Oil Level Switch Circuit.

2. What are the common symptoms of OBDII code P250A in a 2016 GMC Sierra?

- Common symptoms include illuminated Check Engine Light, inaccurate oil level readings, and potential engine performance issues.

3. What are possible causes of OBDII code P250A in a 2016 GMC Sierra?

- Possible causes include a faulty engine oil level switch, wiring issues, low oil level, or a defective oil level sensor.

4. How can I diagnose the Engine Oil Level Switch Circuit issue causing OBDII code P250A in my 2016 GMC Sierra?

- Diagnosis involves checking the oil level sensor, inspecting the wiring for damage, verifying oil levels, and using a scan tool to read the error code.

5. Can I continue driving my 2016 GMC Sierra with OBDII code P250A present?

- It is not recommended to continue driving with this code as it can lead to potential engine damage due to inaccurate oil level readings.

6. How can I repair OBDII code P250A in a 2016 GMC Sierra?

- Repair may involve replacing the engine oil level switch, repairing any damaged wiring, ensuring proper oil level, and clearing the error code with a scan tool.

7. Is it possible to reset OBDII code P250A in a 2016 GMC Sierra without fixing the underlying issue?

- While you can clear the code temporarily, it is crucial to address the root cause to prevent further complications and ensure accurate oil level monitoring.

8. Are there any preventive maintenance tips to avoid encountering OBDII code P250A in a 2016 GMC Sierra?

- Regularly check and maintain proper oil levels, inspect the oil level switch and wiring during routine maintenance, and address any oil-related issues promptly.

9. Can extreme weather conditions affect the Engine Oil Level Switch Circuit and trigger OBDII code P250A in a 2016 GMC Sierra?

- Yes, extreme temperatures can impact sensor performance and wiring integrity, increasing the likelihood of triggering this code.

10. Should I seek professional help to diagnose and repair OBDII code P250A in my 2016 GMC Sierra?

- If you are not confident in diagnosing or repairing electrical issues, it is advisable to seek help from a qualified mechanic or dealership to address the problem accurately.