AutoCodes – KIA – P2506 KIA

P2506 KIA Code - ECM/PCM Power Input Signal Range/Performance

Quick Answer

When the ignition switch is turned "ON", the battery voltage is applied from the battery to the Powertrain Control Module (PCM)/Engine Control Module (ECM) through the main relay. Common causes include Low battery voltage, Faulty Powertrain Control Module (PCM)/Engine Control Module (ECM), ECM/PCM harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2506 KIA indicates ECM/PCM Power Input Signal Range/Performance.
Common causes: Common causes include Low battery voltage, Faulty Powertrain Control Module (PCM)/Engine Control Module (ECM), ECM/PCM harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,519

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 16, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2506 KIA Description

When the ignition switch is turned "ON", the battery voltage is applied from the battery to the Powertrain Control Module (PCM)/Engine Control Module (ECM) through the main relay. In case that the ignition switch is turned "OFF", the ECM/PCM is supplied with power through the battery power input line to control the basic operation of the vehicle. The ECM/PCM set the OBDII code when the ECM/PCM Power Input is out of factory specifications.

OBDII Code P2506 KIA - ECM/PCM Power Input Signal Range/Performance - AutoCodes.com — P2506 KIA Code - ECM/PCM Power Input Signal Range/Performance

What does this mean?

What are the Possible Causes of the DTC P2506 KIA?

Low battery voltage
Faulty Powertrain Control Module (PCM)/Engine Control Module (ECM)
ECM/PCM harness is open or shorted
ECM/PCM circuit poor electrical connection

How to Fix the DTC P2506 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2506 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2506 KIA code?

Need more information on how to fix the P2506 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2506 KIA code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2506 KIA Code

1. What are the common symptoms of OBDII code P2506 in a KIA vehicle?

The common symptoms of OBDII code P2506 in a KIA vehicle may include issues with starting the engine, rough idling, stalling, and reduced overall performance.

2. What does the OBDII code P2506 in a KIA mean?

OBDII code P2506 in a KIA indicates a problem with the ECM/PCM power input signal range or performance. It signifies that the power input signal to the engine control module is outside the expected range.

3. What are some possible causes of OBDII code P2506 in a KIA?

Possible causes of OBDII code P2506 in a KIA include a faulty engine control module (ECM), damaged wiring or connectors in the power input circuit, a weak or dead battery, or issues with the alternator.

4. How can I diagnose the OBDII code P2506 in my KIA?

To diagnose OBDII code P2506 in your KIA, you can use an OBDII scanner to read the trouble codes and then perform a visual inspection of the wiring and connectors in the power input circuit. You may also need to test the battery and alternator for proper voltage output.

5. Can I still drive my KIA with OBDII code P2506 present?

It is not recommended to drive your KIA with OBDII code P2506 present, as it can lead to potential engine performance issues and possible stalling. It is best to address the underlying problem as soon as possible.

6. How can I repair OBDII code P2506 in my KIA?

Repairing OBDII code P2506 in your KIA may involve replacing a faulty engine control module (ECM), repairing or replacing damaged wiring or connectors, charging or replacing the battery, or addressing issues with the alternator.

7. Can a DIYer fix OBDII code P2506 in a KIA?

Depending on your skill level and experience with automotive repairs, you may be able to fix OBDII code P2506 in your KIA as a DIYer. However, it is recommended to have a professional technician diagnose and repair the issue to ensure it is properly resolved.

8. How much does it cost to fix OBDII code P2506 in a KIA?

The cost to fix OBDII code P2506 in a KIA can vary depending on the underlying cause of the issue and the specific repairs needed. Costs may include parts, labor, and diagnostic fees, so it is best to consult with a mechanic for an accurate estimate.

9. Is OBDII code P2506 a common issue in KIA vehicles?

OBDII code P2506 is not extremely common in KIA vehicles, but it can occur due to various factors such as electrical issues, component failures, or inadequate power supply to the engine control module.

10. Will resetting the OBDII code P2506 in my KIA make it go away permanently?

Simply resetting the OBDII code P2506 in your KIA will not make the issue go away permanently if the underlying problem is not addressed. It is crucial to diagnose and repair the root cause of the code to prevent it from reoccurring.