P24C7 GMC Code - Particulate Matter Sensor Temperature Circuit Performance
Quick Answer
The Particulate Matter (PM) sensor monitors the amount of particulates (soot) in the diesel exhaust gas exiting the tailpipe. Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P24C7 GMC indicates Particulate Matter Sensor Temperature Circuit Performance.
- Common causes
- Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P24C7 GMC Description
The operation of the PM Sensor is based on the electrical conductivity characteristic of the diesel particulate. As the exhaust gas flows over the sensing element, soot is absorbed in the combs between the electrodes, eventually creating a conductive path. When the path is formed, it generates a current based on the voltage being applied to the element. The measurement process continues until a preset current value is reached. To avoid misleading readings, the sensor performs a regeneration where the soot is cleaned off by heating up the element before the measurement phase begins. The amount of regenerations is based on vehicle strategy; when the calibrated number of regenerations is reached, the cumulative current readings are used to determine the amount of soot concentration in the exhaust gas which in turn determines the collection efficiency of the Diesel Particulate Filter (DPF). The Diagnostic Trouble Code (DTC) will be set when the particular matter sensor control unit detects an internal fault of the sensor, fault of the sensor circuitry, or low voltage on the sensor supply circuit.
What are the Possible Causes of the DTC P24C7 GMC?
- Faulty Exhaust Particulate Matter Sensor
- Exhaust Particulate Matter Sensor harness is open or shorted
- Exhaust Particulate Matter Sensor circuit poor electrical connection
How to Fix the DTC P24C7 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P24C7 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P24C7 GMC code?
Need more information on how to fix the P24C7 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P24C7 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P24C7 GMC Code
1. What does the OBDII code P24C7 mean for a GMC vehicle?
P24C7 indicates an issue with the particulate matter (PM) sensor temperature circuit performance, which monitors the exhaust system's PM sensor temperature.
2. What are the symptoms of code P24C7 in a GMC?
Common symptoms include the check engine light turning on, reduced engine performance, increased emissions, and possible DPF (Diesel Particulate Filter) regeneration issues.
3. What causes the P24C7 code to appear in GMC vehicles?
Potential causes include a faulty particulate matter sensor, damaged wiring or connectors, a malfunctioning temperature sensor, or software issues in the engine control module (ECM).
4. How do I diagnose the P24C7 code in my GMC?
Start by using an OBDII scanner to confirm the code. Then inspect the PM sensor wiring and connectors for damage, test the sensor with a multimeter, and check for related issues in the exhaust system.
5. Can I drive my GMC with the P24C7 code active?
While the vehicle may still be drivable, prolonged driving with this code can lead to increased emissions, reduced fuel efficiency, and potential damage to the DPF or exhaust system.
6. How do I fix the P24C7 code on a GMC vehicle?
Repairs may involve replacing the PM sensor, repairing damaged wiring or connectors, updating the ECM software, or addressing any issues in the exhaust system.
7. How much does it cost to repair the P24C7 code on a GMC?
Repair costs can vary depending on the issue. Replacing a PM sensor typically costs $200–$500, while wiring repairs may be less expensive. Labor costs depend on the shop rate.
8. Can a dirty diesel particulate filter cause the P24C7 code?
No, the P24C7 code specifically relates to the PM sensor temperature circuit. However, a clogged DPF can cause related issues, so it’s worth inspecting the entire exhaust system.
9. What tools are needed to diagnose and repair the P24C7 code?
You’ll need an OBDII scanner, a multimeter to test the sensor and wiring, and possibly tools to access the PM sensor and exhaust components.
10. Can the P24C7 code be cleared without fixing the problem?
Clearing the code without addressing the underlying issue is not recommended. The code will likely return, and unresolved problems could lead to further damage or emissions violations.
Discuss the causes and fixes for P24C7 GMC OBDII Code
Code P24C7 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
