P24B5 Chevrolet Code - Particulate Matter Sensor Heater Control Circuit Low Voltage
Quick Answer
The Particulate Matter (PM) sensor monitors the amount of particulates (soot) in the diesel exhaust gas exiting the tailpipe. Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P24B5 Chevrolet indicates Particulate Matter Sensor Heater Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P24B5 Chevrolet Description
The operation of the PM Sensor is based on the electrical conductivity characteristic of the diesel particulate. As the exhaust gas flows over the sensing element, soot is absorbed in the combs between the electrodes, eventually creating a conductive path. When the path is formed, it generates a current based on the voltage being applied to the element. The measurement process continues until a preset current value is reached. To avoid misleading readings, the sensor performs a regeneration where the soot is cleaned off by heating up the element before the measurement phase begins. The amount of regenerations is based on vehicle strategy; when the calibrated number of regenerations is reached, the cumulative current readings are used to determine the amount of soot concentration in the exhaust gas which in turn determines the collection efficiency of the Diesel Particulate Filter (DPF). The Diagnostic Trouble Code (DTC) will be set when the particular matter sensor control unit detects an internal fault of the sensor, fault of the sensor circuitry, or low voltage on the sensor supply circuit.
What are the Possible Causes of the DTC P24B5 Chevrolet?
- Faulty Exhaust Particulate Matter Sensor
- Exhaust Particulate Matter Sensor harness is open or shorted
- Exhaust Particulate Matter Sensor circuit poor electrical connection
How to Fix the DTC P24B5 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P24B5 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P24B5 Chevrolet code?
Need more information on how to fix the P24B5 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P24B5 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P24B5 Chevrolet Code
1. What does the OBDII code P24B5 mean for a Chevrolet?
P24B5 indicates a low voltage issue in the particulate matter (PM) sensor heater control circuit, which monitors and helps regulate emissions from the vehicle's exhaust system.
2. What are the common symptoms of code P24B5 in a Chevrolet?
Symptoms may include the check engine light turning on, reduced fuel efficiency, increased emissions, and potential limp mode activation.
3. What causes the P24B5 code to appear on a Chevrolet?
Common causes include a faulty PM sensor heater, damaged wiring or connections in the heater control circuit, a blown fuse, or an issue with the vehicle's powertrain control module (PCM).
4. Can I drive my Chevrolet with a P24B5 code?
While the vehicle may still be drivable, it is not recommended as it can lead to increased emissions, potential damage to the exhaust system, and reduced engine performance.
5. How do I diagnose the P24B5 code in my Chevrolet?
Diagnosis involves checking the PM sensor and its heater circuit for damage, testing for proper voltage and continuity in the wiring, and inspecting fuses and connectors.
6. What repairs are typically needed to fix a P24B5 code on a Chevrolet?
Repairs may include replacing the particulate matter sensor, repairing or replacing damaged wiring, replacing a blown fuse, or reprogramming/updating the PCM if necessary.
7. How much does it cost to fix a P24B5 code on a Chevrolet?
The repair cost varies depending on the issue but typically ranges from $200 to $600, covering diagnostics, parts, and labor.
8. Can a dirty particulate matter sensor cause a P24B5 code?
No, this code is specifically related to the sensor heater control circuit's low voltage, not the cleanliness of the sensor itself.
9. Will clearing the check engine light fix the P24B5 code?
Clearing the code will temporarily turn off the check engine light, but unless the underlying issue is resolved, the code will reappear.
10. Is the P24B5 code related to the diesel particulate filter (DPF)?
Yes, the particulate matter sensor is part of the emissions system, which works closely with the DPF to monitor and reduce exhaust pollutants.
Discuss the causes and fixes for P24B5 Chevrolet OBDII Code
Code P24B5 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
