P2480 Code - Exhaust Gas Temperature Sensor Circuit/Open Bank 1 Sensor 5
|P2480 code possible causes
- Faulty Exhaust Gas Temperature Sensor (EGTS) Bank 1 Sensor 5
- Exhaust Gas Temperature Sensor Bank 1 Sensor 5 harness is open or shorted
- Exhaust Gas Temperature Sensor Bank 1 Sensor 5 circuit poor electrical connection
- Exhaust leaks
- Excessive particulate matter buildup on sensor
|How do I fix the P2480 code?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|Cost of diagnosing the P2480 code
Labor: 1.0The cost of diagnosing the P2480 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P2480 code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|P2480 code descriptionThe Powertrain Control Module (PCM) continuously monitors the Exhaust Gas Temperature Sensor (EGTS) for proper circuit continuity and out of range high values. The EGTS is located in front of the Diesel Oxidation Catalyst (DOC) and/or in front of the Diesel Particulate Filter (DPF). The EGTS detects exhaust gas temperature and converts it into a voltage and feeds back to the PCM with the voltage signal in order to control engine conditions to effectively reduce emissions. The PCM sets the P2480 OBDII code when the Exhaust Gas Temperature Sensor is out of factory specifications.
|Need more information with the P2480 code?Need more information on how to fix the P2480 code? Get Access to Factory Service Manuals
|P2480 code information for specific makes
|Need help with a P2480 code?Get the P2480 code diagnosed by a professional: Find a repair shop in your area
|P2480 code commentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the P2480 code? Have you replaced any parts?
Any information is appreciated. Thanks